Related Experiment Video
Updated: Feb 22, 2026

Combining Volumetric Capnography And Barometric Plethysmography To Measure The Lung Structure-function Relationship
Published on: January 8, 2019
Determination of respiratory system compliance during pressure support ventilation by small variations of pressure
Tobias Becher1, Dirk Schädler2, Philipp Rostalski3
1Department of Anesthesiology and Intensive Care Medicine, University Medical Center Schleswig-Holstein, Campus Kiel, Arnold-Heller-Straße 3, Haus 12, 24105, Kiel, Germany.
Abstract:
In mechanically ventilated patients, measurement of respiratory system compliance (Crs) is of high clinical interest. Spontaneous breathing activity during pressure support ventilation (PSV) can impede the correct assessment of Crs and also alter the true Crs by inducing lung recruitment. We describe a method for determination of Crs during PSV and assess its accuracy in a study on 20 mechanically ventilated patients. To assess Crs during pressure support ventilation (Crs,PSV), we performed repeated changes in pressure support level by ± 2 cmH2O. Crs,PSV was calculated from the volume change induced by these changes in pressure support level, taking into account the inspiration time and the expiratory time constant. As reference methods, we used Crs, measured during volume controlled ventilation (Crs,VCV). In a post-hoc analysis, we assessed Crs during the last 20% of the volume-controlled inflation (Crs,VCV20). Values were compared by linear regression and Bland-Altman methods comparison. Comparing Crs,PSV to the reference value Crs,VCV, we found a coefficient of determination (r2) of 0.90, but a relatively high bias of - 7 ml/cm H2O (95% limits of agreement - 16.7 to + 2.7 ml/cmH2O). Comparison with Crs,VCV20 resulted in a negligible bias (- 1.3 ml/cmH2O, 95% limits of agreement - 13.9 to + 11.3) and r2 of 0.81. We conclude that the novel method provides an estimate of end-inspiratory Crs during PSV. Despite its limited accuracy, it might be useful for non-invasive monitoring of Crs in patients undergoing pressure support ventilation.
Related Concept Videos
Pressure Relationships in Thoracic Cavity
Breathing Mechanisms
Both intra-alveolar and intrapleural pressures rely on specific lung properties. The ability to breathe—allowing air to enter the lungs...
Respiratory Volumes
Tidal Volume (TV) Tidal volume (TV) is the air inhaled or exhaled in a...
Factors Affecting Pulmonary Ventilation
Alveolar Surface Tension
The alveolar fluid lines the luminal surface of the alveoli and exerts a force called surface tension. This force is caused by the polar water molecules in the liquid being more strongly attracted to each...
Ventilatory Modes
There are three ventilatory modes: full support, partial support, and spontaneous. These are described below.
Full Support Modes
Full support modes include controlled mechanical ventilation, continuous mandatory...
Assessment of Ventilation I: Respiratory Rate
A Ventilation assessment is critical for monitoring a patient's health status. Respiration, one of the most accessible vital signs, provides insights into the function of numerous body systems and can indicate serious health issues, such as brainstem injuries from head trauma.
Critical Guidelines for Assessing Ventilation:
Assessment of Ventilation II: Respiratory Depth and Rhythm
Respiratory depth measures the volume of air inhaled or exhaled during a breath. It can vary from shallow to deep and typically remains consistent when a person is at rest or asleep. Occasionally, individuals will automatically inhale deeply, known as sighing, which inflates the lungs with more air than normal breathing.
To assess respiratory depth, observe the degree of chest excursion or movement:

