Related Experiment Video
Updated: Feb 20, 2026
Low Pressure Vapor-assisted Solution Process for Tunable Band Gap Pinhole-free Methylammonium Lead Halide Perovskite Films
Published on: September 8, 2017
Vacuum-Deposited Organometallic Halide Perovskite Light-Emitting Devices
Kai-Ming Chiang1, Bo-Wei Hsu1, Yi-An Chang1
1Department of Materials Science and Engineering, National Tsing Hua University , No. 101, Section 2, Kuang-Fu Road, Hsinchu 300, Taiwan.
Abstract:
In this work, a sequential vacuum deposition process of bright, highly crystalline, and smooth methylammonium lead bromide and phenethylammonium lead bromide perovskite thin films are investigated and the first vacuum-deposited organometallic halide perovskite light-emitting devices (PeLEDs) are demonstrated. Exceptionally low refractive indices and extinction coefficients in the emission wavelength range are obtained for these films, which contributed to a high light out-coupling efficiency of the PeLEDs. By utilizing these perovskite thin films as emission layers, the vacuum-deposited PeLEDs exhibit a very narrow saturated green electroluminescence at 531 nm, with a spectral full width at half-maximum bandwidth of 18.6 nm, a promising brightness of up to 6200 cd/m2, a current efficiency of 1.3 cd/A, and an external quantum efficiency of 0.36%.
