Related Experiment Video
Updated: Feb 19, 2026

Transmission of Multiple Signals through an Optical Fiber Using Wavefront Shaping
Published on: March 20, 2017
DFT/IDFT-free receiving scheme for spread-OFDM signals employing low-sampling-rate ADCs
Abstract:
This paper presents a DFT/IDFT-free receiving scheme for spread-OFDM signals. Leveraging sub-Nyquist sampling and proper sampling delay, the proposed scheme enables each user to receive the requested data without the need for DFT and IDFT; thus, the complexity at receiver can be greatly reduced. Nonetheless, DC component is altered in an AC coupling system, such that severe waveform distortion is caused when the process of DFT/IDFT is omitted. Thus, a DC-zeroing algorithm is proposed to guarantee constant DC after sub-Nyquist sampling, thereby eliminating such distortion. To experimentally verify the concept of proposed scheme, a 27.15-Gbit/s optical spread-OFDM signal was transmitted over fiber and received by the DFT/IDFT-free scheme with sub-Nyquist sampling. More users will reduce the required sampling rate at receiver; for the case of 16 users, the required sampling rate for the 27.15-Gbit/s signal is as low as 1 GSample/s. The experimental results show that error-free transmission was achievable, and the penalty due to lowering sampling rate (i.e., increasing the number of users) is insignificant.
Related Concept Videos
Upsampling
Downsampling
The Fourier transform of the decimated sequence reveals a combination of scaled and shifted versions of the original spectrum. This...
Discrete-Time Fourier Series
For a discrete-time periodic signal x[n]...
Aliasing
If the sampling frequency is below the Nyquist rate, these replicas overlap, preventing the original...
Discrete Fourier Transform
Bandpass Sampling
A bandpass signal has a spectrum with a lower frequency limit, denoted as ω1, and an upper frequency limit, denoted as ω2....

