Related Experiment Video
Updated: Feb 18, 2026
06:34
Finite Element Modeling for the Simulation of the Quasi-Static Compression of Corrugated Tapered Tubes
Published on: January 6, 2023
3.3K
Correction: CFD study on NACA 4415 airfoil implementing spherical and sinusoidal Tubercle Leading Edge
Plos One
|November 22, 2017
Summary
This study corrects a previously published article DOI. The correction ensures accurate citation and referencing for scientific literature. Researchers should use the updated DOI for all future citations.
Area of Science:
- Bibliometrics
- Scientific Publishing
Background:
- Accurate citation is crucial for scientific integrity.
- Maintaining correct digital object identifiers (DOIs) ensures retrievability of research.
Purpose of the Study:
- To provide a corrected Digital Object Identifier (DOI) for a specific scientific article.
- To ensure proper attribution and access to the research.
Main Methods:
- A correction notice was issued for the article.
- The incorrect DOI was identified and replaced with the correct one.
Main Results:
- The article DOI has been corrected to 10.1371/journal.pone.0183456.
- This correction rectifies a previous error in the article's metadata.
Conclusions:
- The corrected DOI ensures accurate referencing and access to the scientific work.
- This action upholds the standards of scientific publishing and data integrity.
More Related Videos
Related Concept Videos
01:23Steady, Laminar Flow in Circular Tubes
1.2K
Hagen-Poiseuille flow describes a viscous fluid's steady, incompressible flow through a cylindrical tube with a constant radius R. This flow profile is often applied to understand fluid transport in narrow channels, such as capillaries. It serves as a foundational example of laminar flow. In this model, cylindrical coordinates (r,θ,z) are used to describe the radial (r), angular (θ), and axial (z) dimensions within the tube. For Hagen-Poiseuille flow, the velocity profile is purely axial,...
1.2K
01:15Thin-Walled Hollow Shafts
597
In analyzing a thin-walled hollow shaft subjected to torsional loading, a segment with width dx is isolated for examination. Despite its equilibrium state, this segment faces torsional shearing forces at its ends. These forces are quantitatively described by the product of the longitudinal shearing stress on the segment's minor surface and the area of this surface, leading to the concept of shear flow. This shear flow is consistent throughout the structure, indicating a uniform distribution of...
597
01:26Spherical and Cylindrical Capacitor
6.8K
A spherical capacitor consists of two concentric conducting spherical shells of radii R1 (inner shell) and R2 (outer shell). The shells have equal and opposite charges of +Q and −Q, respectively. For an isolated conducting spherical capacitor, the radius of the outer shell can be considered to be infinite.
Conventionally, considering the symmetry, the electric field between the concentric shells of a spherical capacitor is directed radially outward. The magnitude of the field,...
Conventionally, considering the symmetry, the electric field between the concentric shells of a spherical capacitor is directed radially outward. The magnitude of the field,...
6.8K
01:16Torsion of Noncircular Members
625
Circular shafts undergoing torsional stress maintain their cross-sectional integrity due to their axisymmetric nature. This symmetry ensures an even distribution of stress, allowing the shaft to withstand torsion without distorting. In contrast, square bars, lacking this axial symmetry, experience significant distortion across their cross-sections when subjected to torsion, with the exception of along their diagonals and at lines connecting midpoints. A detailed examination of a cubic element...
625
01:10Deformation in a Circular Shaft
953
One of the distinctive characteristics of circular shafts is their ability to maintain their cross-sectional integrity under torsion. In other words, each cross-section continues to exist as a flat, unaltered entity, simply rotating like a solid, rigid slab. To understand the distribution of shearing stress within such a shaft, consider a cylindrical section inside this circular shaft. This section has a length of L and a radius of R, with one end fixed. The radius of the cylindrical section is...
953
01:18Deformations in a Symmetric Member in Bending
536
When analyzing the deformation of a symmetric prismatic member subjected to bending by equal and opposite couples, it becomes clear that as the member bends, the originally straight lines on its wider faces curve into circular arcs, with a constant radius centered at a point known as Point C. This phenomenon helps to understand the stress and strain distribution within the member more clearly.
When the member is segmented into tiny cubic elements, it is observed that the primary stress...
When the member is segmented into tiny cubic elements, it is observed that the primary stress...
536