Fabrication and evaluation of 3D printed BCP scaffolds reinforced with ZrO₂ for bone tissue applications

Fused deposition modeling (FDM) is a promising 3D printing and manufacturing step to create well interconnected porous scaffold designs from the computer-aided design (CAD) models for the next generation of bone scaffolds. The purpose of this study was to fabricate and evaluate a new biphasic calcium phosphate (BCP) scaffold reinforced with zirconia (ZrO₂ ) by a FDM system for bone tissue engineering. The 3D slurry foams with blending agents were successfully fabricated by a FDM system. Blending materials were then removed after the sintering process at high temperature to obtain a targeted BCP/ZrO₂ scaffold with the desired pore characteristics, porosity, and dimension. Morphology of the sintered scaffold was investigated with SEM/EDS mapping. A cell proliferation test was carried out and evaluated with osteosarcoma MG-63 cells. Mechanical testing and cell proliferation evaluation demonstrated that 90% BCP and 10% ZrO₂ scaffold had a significant effect on the mechanical properties maintaining a structure compared that of only 100% BCP with no ZrO₂ . Additionally, differentiation studies of human mesenchymal stem cells (hMSCs) on BCP/ZrO₂ scaffolds in static and dynamic culture conditions showed increased expression of bone morphogenic protein-2 (BMP-2) when cultured on BCP/ZrO₂ scaffolds under dynamic conditions compared to on BCP control scaffolds. The manufacturing of BCP/ZrO₂ scaffolds through this innovative technique of a FDM may provide applications for various types of tissue regeneration, including bone and cartilage.