Full Characterization of CO₂-Oil Properties On-Chip: Solubility, Diffusivity, Extraction Pressure, Miscibility, and...

Carbon capture, storage, and utilization technologies target a reduction in net CO₂ emissions to mitigate greenhouse gas effects. The largest such projects worldwide involve storing CO₂ through enhanced oil recovery-a technologically and economically feasible approach that combines both storage and oil recovery. Successful implementation relies on detailed measurements of CO₂-oil properties at relevant reservoir conditions (P = 2.0-13.0 MPa and T = 23 and 50 °C). In this paper, we demonstrate a microfluidic method to quantify the comprehensive suite of mutual properties of a CO₂ and crude oil mixture including solubility, diffusivity, extraction pressure, minimum miscibility pressure (MMP), and contact angle. The time-lapse oil swelling/extraction in response to CO₂ exposure under stepwise increasing pressure was quantified via fluorescence microscopy, using the inherent fluorescence property of the oil. The CO₂ solubilities and diffusion coefficients were determined from the swelling process with measurements in strong agreement with previous results. The CO₂-oil MMP was determined from the subsequent oil extraction process with measurements within 5% of previous values. In addition, the oil-CO₂-silicon contact angle was measured throughout the process, with contact angle increasing with pressure. In contrast with conventional methods, which require days and ∼500 mL of fluid sample, the approach here provides a comprehensive suite of measurements, 100-fold faster with less than 1 μL of sample, and an opportunity to better inform large-scale CO₂ projects.