Zirconia toughened mica glass ceramics for dental restorations
Sivaranjani Gali1, Ravikumar K2, B V S Murthy1
1Department of Prosthodontics, Faculty of Dental Sciences, M. S. Ramaiah University of Applied Sciences, Bangalore, India.
Objective:
The objective of the present study is to understand the role of yttria stabilized zirconia (YSZ) in achieving the desired spectrum of clinically relevant mechanical properties (hardness, elastic modulus, fracture toughness and brittleness index) and chemical solubility of mica glass ceramics.
Methods:
The glass-zirconia mixtures with varying amounts of YSZ (0, 5, 10, 15 and 20wt.%) were ball milled, compacted and sintered to obtain pellets of glass ceramic-YSZ composites. Phase analysis was carried out using X-ray diffraction and microstructural characterization with SEM revealed the crystal morphology of the composites. Mechanical properties such as Vickers hardness, elastic modulus, indentation fracture toughness and chemical solubility were assessed.
Results:
Phase analysis of sintered pellets of glass ceramic-YSZ composites revealed the characteristic peaks of fluorophlogopite (FPP) and tetragonal zirconia. Microstructural investigation showed plate and lath-like interlocking mica crystals with embedded zirconia. Vickers hardness of 9.2GPa, elastic modulus of 125GPa, indentation toughness of 3.6MPa·m1/2, and chemical solubility of 30microg/cm2 (well below the permissible limit) were recorded with mica glass ceramics containing 20wt.% YSZ.
Significance:
An increase in hardness and toughness of the glass ceramic-YSZ composites with no compromise on their brittleness index and chemical solubility has been observed. Such spectrum of properties can be utilised for developing a machinable ceramic for low stress bearing inlays, onlays and veneers.
Related Concept Videos
Restorative Care
The Looking Glass Self
Le Chatelier's Principle: Changing Concentration
Le Chatelier's Principle: Changing Volume (Pressure)
The Parasympathetic Nervous System
Translesion DNA Polymerases
TLS polymerases are found in all three domains of life - archaea, bacteria, and eukaryotes. Of the different classes of TLS polymerases, members of the Y family are fitted with specialized structures that...


