Improving Charge Injection via a Blade-Coating Molybdenum Oxide Layer: Toward High-Performance Large-Area Quantum-Dot...

A solution-processed molybdenum oxide (MoO _x) as the hole injection layer (HIL) by doctor-blade coating was developed to improve the efficiency and lifetime of red-emitting quantum-dot light-emitting diodes (QD-LEDs). It has been demonstrated that by adding isopropyl alcohol into the MoO _x precursor during the doctor-blade coating process, the morphology, composition, and the surface electronic structure of the MoO _x HIL could be tailored. A high-quality MoO _x film with optimized charge injection was obtained, based on which all-solution-processed highly efficient red-emitting QD-LEDs were realized by using a low-cost doctor-blade coating technique under ambient conditions. The red QD-LEDs exhibited the maximum current efficiency and external quantum efficiency of 16 cd/A and 15.1%, respectively. Moreover, the lifetime of red devices initializing at 100 cd/m² was 3236 h under ambient conditions, which is about twice as long as those with a conventional poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) HIL. Large-area QD-LEDs with 4 in. emitting areas were fabricated with blade coating as well, which exhibit a high efficiency of 12.1 cd/A for red emissions. Our work paves a new way to the realization of efficient large-area QD-LEDs, and the processing and findings from this work can be expanded into next-generation lighting and flat-panel displays.