Efficiency and safety of optically modified fiber tips for laser angioplasty

To evaluate the safety and efficiency of optically modified fiber tips, craters were created in human cadaver atherosclerotic arterial walls using sapphire contact probes and lensed fibers connected to a continuous wave neodymium yttrium aluminum garnet (Nd-YAG) laser. Laser energy was emitted at a constant level of 50 J. The sapphire contact probe catheter consisted of a round 2.2 mm diameter synthetic sapphire attached to an 8F catheter into which a 0.2 mm diameter optical fiber was inserted with the distal tip maintained at 3 mm from the sapphire. The lensed fiber catheter consisted of a 0.2 mm optical fiber at the end of which a 1 mm diameter lens was made. The fiber was inserted into a 5F low profile balloon catheter with the lens maintained 3 mm beyond the catheter tip. During laser emissions the catheter tips were maintained in a stationary position in contact with tissue targets immersed in blood at an angle of 90 degrees. The diameter of holes at the entry and exit of craters, the depth of craters and thermal injury to adjacent tissue (rim of carbonization and vacuolization) were measured with microscopy. The volume of tissue removed was derived from these values. Controlled effect index was determined as the ratio of diameter of holes and the extent of thermal injury. Efficiency was determined as the ratio of volume of tissue removed and the energy required to vaporize tissue.(ABSTRACT TRUNCATED AT 250 WORDS)