Related Experiment Video

Updated: Feb 12, 2026

Study of a Dot-patterning Process on Flexible Materials using Impact Print-Type Hot Embossing Technology
06:57

Study of a Dot-patterning Process on Flexible Materials using Impact Print-Type Hot Embossing Technology

Published on: April 6, 2020

6.4K

3D printing processes for photocurable polymeric materials: technologies, materials, and future trends

Gabriele Taormina1, Corrado Sciancalepore2, Massimo Messori3

  • 11 Department of Engineering and Architecture, University of Parma, Parma, Italy.

Journal of Applied Biomaterials & Functional Materials
|April 4, 2018
PubMed

Keywords:
3D printingdigital light processingpolymeric-nanocompositestereolithography

More Related Videos

Micro 3D Printing Using a Digital Projector and its Application in the Study of Soft Materials Mechanics09:24

Micro 3D Printing Using a Digital Projector and its Application in the Study of Soft Materials Mechanics

Published on: November 27, 2012

26.0K
Supercritical Nitrogen Processing for the Purification of Reactive Porous Materials09:05

Supercritical Nitrogen Processing for the Purification of Reactive Porous Materials

Published on: May 15, 2015

15.4K

Related Concept Videos

Genetic Material01:20

Genetic Material

Within the human body, a complex and detailed system of trillions of cells works in unison to sustain life. Each cell houses a nucleus, which contains 46 chromosomes divided into 23 pairs. Chromosomes are highly coiled structures made of the genetic material DNA. These chromosomes are essential carriers of genetic information, with half inherited from the mother through her egg and the other half from the father's sperm, combining to create the unique genetic makeup of an individual.
3.8K
Members Made of Elastoplastic Material01:19

Members Made of Elastoplastic Material

The behavior of elastoplastic materials under bending stresses, particularly in structural members with rectangular cross-sections, is crucial for predicting material responses and understanding failure modes. Initially, when a bending moment is applied, the stress distribution across the section follows Hooke's Law and is linear and elastic. This distribution means the stress increases from the neutral axis to the maximum at the outer fibers, up to the elastic limit.
As the bending moment...
414
Bending of Members Made of Several Materials01:11

Bending of Members Made of Several Materials

In analyzing a structural member composed of two different materials with identical cross-sectional areas, it is crucial to understand how their distinct elastic properties affect the member's response under load. The analysis involves assessing stress and strain distributions using the transformed section concept, which accounts for variations in material properties.
Hooke's Law determines stress in each material, stating that stress is proportional to strain but varies due to each material's...
622
Bending of Material: Problem Solving01:09

Bending of Material: Problem Solving

In this lesson, determine the ratio of the maximum bending moments applied to two metal pipes, given that both pipes can withstand a maximum stress of 100 MPa. Both pipes have an outer radius of 1.8 cm. Pipe A has an inner radius of 1.5 cm, and Pipe B has an inner radius of 1 cm. The ratio of the maximum bending moment applied to two metallic pipes, each with a different inner and outer radius, is determined by considering their dimensions. The inner radius of the first pipe is 1.5 cm, and for...
560
Circular Shafts - Elastoplastic Materials01:24

Circular Shafts - Elastoplastic Materials

The study of solid circular shafts under stress shows that within the elastic limit, stress increases directly to the distance from the shaft's center. This relationship holds until the shaft reaches a critical point of stress, beyond which it begins to yield, marking the transition from elastic to plastic deformation. At this crucial juncture, the maximum torque the shaft can endure without permanent deformation is determined, signifying the limit of its elastic behavior.
As torque on the...
502
Stress-Strain Diagram - Ductile Materials01:24

Stress-Strain Diagram - Ductile Materials

The stress-strain relationship in ductile materials such as structural steel or aluminium is intricate and progresses through several stages. When a specimen is loaded, it initially exhibits a linear length increase, depicted by a steep straight line on the stress-strain diagram. It indicates the material is elastically deforming and will return to its original shape once unloaded. However, when a critical stress value is reached, plastic deformation begins. This stage sees substantial...
2.1K