Related Experiment Video
Updated: Feb 11, 2026

Ensemble Force Spectroscopy by Shear Forces
Published on: July 26, 2022
Bioinspired Superdurable Pestle-Loop Mechanical Interlocker with Tunable Peeling Force, Strong Shear Adhesion, and
Junrong Jiao1,2, Feilong Zhang2,3, Tian Jiao4
1CAS Key Laboratory of Bio-inspired Materials and Interfacial Science CAS Center for Excellence in Nanoscience Technical Institute of Physics and Chemistry Chinese Academy of Sciences Beijing 100190 P. R. China.
Abstract:
Velcro, the most typical hook-loop interlocker, often suffers from undesirable deformation, breaking, and noise because of the structure of the hook. Inspired by the arrester system of dragonfly, a new mechanical interlocker with a nylon pestle instead of the traditional hook is developed. The pestle-loop mechanical interlocker shows a tunable peeling force from 0.4 ± 0.14 to 6.5 ± 0.72 N and the shear adhesion force of pestle-loop mechanical interlocker is about twice as much as that of velcro. The pestle tape can be separated and fastened with the loop tape up to 30 000 cycles while keeping the original adhesive force and the pestle structure. In comparison, only after 4000 cycles most hooks of the commercial velcro are deformed and even broken, completely losing their adhesive function and their hook structure. These experimental results are further supported by finite element simulitions-the base of pestle mainly bears the separation-caused strain while the middle of hook does. Notably, the sound volume during the separation of pestle-loop mechanical interlocker is merely 49 ± 7.4 dB, much lower than 70 ± 3.5 dB produced by the velcro.
Related Concept Videos
Normal and Shear Force
Adhesion
Capillary action is a result of water’s adhesive tendencies. When a narrow...
Force On A Current Loop In A Magnetic Field
Titration Calculations: Strong Acid - Strong Base
A titration is carried out for 25.00 mL of 0.100 M HCl (strong acid) with 0.100 M of a strong base NaOH. The pH at different volumes of added base solution can be calculated as follows:
(a) Titrant volume = 0 mL. The solution pH is due to the acid ionization of HCl. Because this is a strong acid, the ionization is complete and the hydronium ion molarity is 0.100 M. The pH of the solution is then:
Strong Acid and Base Solutions
Titration of a Strong Acid with a Strong Base

