Related Experiment Video
Updated: Feb 9, 2026

Formulations for Freeze-drying of Bacteria and Their Influence on Cell Survival
Published on: August 3, 2013
Protective effect of sugars on storage stability of microwave freeze-dried and freeze-dried Lactobacillus paracasei
S Ambros1, F Hofer1, U Kulozik1
1Chair of Food and Bioprocess Engineering, Technical University of Munich, Freising, Germany.
Aims:
Microwave freeze drying (MWFD) in comparison with conventional freeze drying allows for intensification of the preservation process of lactic acid bacteria without imposing additional processing stress. Viability as a function of storage time of microwave freeze-dried Lactobacillus paracasei ssp. paracasei F19 was investigated in comparison to conventionally lyophilized bacteria of the same strain. Furthermore, the impact of the protectants, sorbitol, trehalose and maltodextrin, on shelf life was analysed.
Methods And Results:
The highest inactivation rates of 0·035 and 0·045 day-1 , respectively, were found for cultures without protectants. Thus, all additives were found to exhibit a protective effect during storage with inactivation rates between 0·015 and 0·040 day-1 . Although trehalose and maltodextrin samples were in the glassy state during storage, in contrast to samples containing sorbitol as protectant, the best protective effect could be found for sorbitol with the lowest inactivation rate of 0·015 day-1 .
Conclusions:
Due to its low molecular weight, it might protect cells owing to better adsorption to the cytoplasma membrane. Sorbitol additionally shows antioxidative properties. Storage behaviour of microwave freeze-dried cultures follows the typical behaviour of a product dried by conventional lyophilization. No significant influence of the drying technique on storage behaviour was detected.
Significance And Impact Of The Study:
General findings concerning storage behaviour in freeze drying are likely to be applicable in MWFD with only slight adjustments.
Related Concept Videos
Freezing Point Depression and Boiling Point Elevation
The boiling point of a liquid is the temperature at which its vapor pressure is equal to ambient atmospheric pressure. Since the vapor pressure of a solution is lowered due to the presence of nonvolatile solutes, it stands to reason that the solution’s boiling point will subsequently be increased. Vapor pressure increases with temperature, and so a solution will require a higher temperature than will pure solvent to achieve any given vapor pressure, including one...
Phase Transitions: Melting and Freezing
Sugars as Energy Storage Molecules
Dry Friction
To illustrate this concept, imagine a wooden crate resting on a rough, non-uniform horizontal surface. When an external force is applied to...
Drying Shrinkage
A portion of this drying shrinkage can be reversed; if the concrete is...
Characteristics of Dry Friction
Before the wheelbarrow starts moving, the static frictional force acts tangentially to the contact surface, opposing the force that is about to induce the motion. This frictional force prevents the...

