Edge Singularities and Quasilong-Range Order in Nonequilibrium Steady States

Jacopo De Nardis1, Miłosz Panfil2

  • 1Département de Physique, École Normale Supérieure/PSL Research University, CNRS, 24 rue Lhomond, 75005 Paris, France.

Related Concept Videos

Singularity Functions for Shear01:26

Singularity Functions for Shear

In structural analysis, singularity functions are crucial in simplifying the representation of shear forces in beams under discontinuous loading. These functions describe discontinuous  variations in shear force across a beam with varying loads by using a single mathematical expression, regardless of the complexity of the loading conditions. The singularity functions are derived from creating a free-body diagram of the beam and then making conceptual cuts at specific points to examine the...
454
Range00:59

Range

The range is one of the measures of variation. It can be defined as the difference between a dataset's highest and lowest values. For example, in the study of seven 16-ounce soda cans, the filled volume of soda was measured, thus producing the following amount (in ounces) of soda:
15.9; 16.1; 15.2; 14.8; 15.8; 15.9; 16.0; 15.5
Measurements of the amount of soda in a 16-ounce can vary since different subjects record these measurements or since the exact amount - 16 ounces of liquid, was not...
14.3K
Singularity Functions for Bending Moment01:18

Singularity Functions for Bending Moment

Singularity functions simplify the representation of bending moments in beams subjected to discontinuous loading, allowing the use of a single mathematical expression. For a supported beam AB, with uniform loading from its midpoint M to the right side end B, the approach involves conceptual 'cuts' at specific points to determine the bending moment in each segment. By cutting the beam at a point between A and M, the bending moment for the segment before reaching midpoint M is represented using a...
569
Steady State Concentration01:05

Steady State Concentration

A steady state refers to the level of a drug in the body once it has reached an equilibrium between administration and elimination. It represents the point at which the drug administration rate equals the drug elimination rate, resulting in a relatively constant concentration in the body over time. The dynamic equilibrium is crucial to ensure the drug's effectiveness with minimal risk of toxicity.
Most drugs are administered in repeated doses at fixed intervals or through continuous...
6.0K
Steady Flow of a Fluid Stream01:27

Steady Flow of a Fluid Stream

Consider a control volume, such as a pipe with solid boundaries, through which fluid flows and changes direction due to the impulse exerted by the resulting force from the pipe walls. In steady flow, the mass of fluid entering the control volume at a given time, t, with velocity v1, is equal to the mass leaving after infinitesimal time dt, with velocity v2.
During this process, the momentum of the fluid within the control volume remains constant over the time interval dt. By applying the...
767
Transient and Steady-state Response01:24

Transient and Steady-state Response

In control systems, test signals are essential for evaluating performance under various conditions. The ramp function is effective for systems undergoing gradual changes, while the step function is suitable for assessing systems facing sudden disturbances. For systems subjected to shock inputs, the impulse function is the most appropriate test signal.
These test signals are integral in designing control systems to exhibit two key performance aspects: transient response and steady-state...
577