Related Experiment Video
Updated: Feb 8, 2026

Author Spotlight: Employing Green-Chemistry Principles for Safe and Sustainable Synthesis of Biodiesels
Published on: April 19, 2024
[Pollutant Emissions from Diesel Buses Fueled with Waste Cooking Oil Based Biodiesel]
Zhi-Yuan Hu1, Biao-Qi Lin1, Cheng Huang2,3
1School of Automotive Studies, Tongji University, Shanghai 201804, China.
Abstract:
Two diesel buses respectively certified to meet China Ⅲ and China Ⅴ emission standards were used as prototype vehicles, fixed on a heavy-duty chassis dynamometer and driven according to a typical city bus driving cycle to analyze the pollutant emissions and volatile organic compounds (VOCs). The buses were fueled with diesel and waste cooking oil based biodiesel with 10 vol% blend ratio (B10). The emissions of total hydrocarbon(THC), CO, particulate matter (PM), and the number of solid particles with a diameter of 23 nm to 2.5 μm (referred to as "solid particulate number of PM2.5") from the bus certified to meet China Ⅴ (referred to as "China V bus") were 39.3%, 19.9%, 77.4%, and 28.4% lower than those from the other bus certified to meet China Ⅲ (referred to as "China Ⅲ bus"), while NO emissions were 31.7% higher. Moreover, alkanes, alkenes, aromatic hydrocarbons, and oxygenated compounds in VOCs emitted from the China V bus were lower than those emitted from the China Ⅲ bus, suggesting lower atmospheric reactivity and smaller potential of secondary organic aerosol formation. Compared with the emission results of two diesel-fueled buses, the B10-fueled buses emitted smaller amounts of THC, CO, PM, and solid particulate number of PM2.5, lower oxygenated compounds but higher alkenes; slightly higher NO emissions than China Ⅲ but slightly lower NO emissions than China V. Consequently, the atmospheric reactivity of VOCs in exhaust gas from the bus fueled with B10 was higher than that from the diesel-powered bus.
More Related Videos
Related Concept Videos
Batteries and Fuel Cells
Otto and Diesel Cycle
Emission Spectra
Positron Emission Tomography
One of the main requirements of a PET scan is a positron-emitting radioisotope, which is produced in a cyclotron and then attached to a substance used by the part of the body...
Design Example: Flow of Oil Through Circular Pipes
Atomic Emission Spectroscopy: Lab

