Related Experiment Video
Updated: Feb 8, 2026

Extraction of Structural Extracellular Polymeric Substances from Aerobic Granular Sludge
Published on: September 26, 2016
[Characteristics and Mechanism of Biological Nitrogen and Phosphorus Removal Granular Sludge Under Carbon Source
Shi-You Qin1,2, Wei Chen1, Zhao-Rui Ma2,3
1School of Urban Construction, Wuhan University of Science and Technology, Wuhan 430065, China.
Abstract:
In SBR reactor, the mature granular sludge fed with sodium acetate was gradually cultivated with different carbon sources (sodium acetate/glucose ratio was 1:0, 3:1, 1:1, 1:3 and 0:1, in terms of COD, respectively). During the five stages, the physical, biochemical properties, extracellular polymeric substances (EPS), phosphorus fractions and nitrogen and phosphorus removal efficiency of granular sludge were studied. 705 days' experimental results were showed as follows. At stage Ⅳ, the granular sludge had the smallest diameter of 0.5 mm; moreover the phosphorus release/uptake rate, denitrification rate and the total phosphorus (TP) content were the lowest. While at stages Ⅰ and Ⅱ, the phosphorus release/uptake and denitrification rates were the highest, meanwhile, the TP content reached up to 72.36 mg·g-1, and the EPS content was about 350 mg·g-1, as a result, the nitrogen and phosphorus removal efficiencies were both over 94%. Nevertheless at stage Ⅴ, the biochemical rates were slightly slower than values of stages Ⅰ and Ⅱ, simultaneously the TP, glycogen and EPS contents in sludge were maintained at 69.60 mg·g-1, 224.18 mg·g-1 and 200 mg·g-1, respectively, while high nitrogen and phosphorus removal efficiency was obtained. During all stages, Ca-P was the main phosphorus fraction, and inorganic phosphorus(IP) was closely related to phosphorus removal of granular sludge.
More Related Videos
Related Concept Videos
Chirality at Nitrogen, Phosphorus, and Sulfur
A consequence of chirality is the need for enantiomeric resolution. While this is theoretically possible for all...
Mechanical Characteristics of Steel
The tension test is fundamental for determining tensile strength. In this test, a steel specimen is stretched using a gripping device until it breaks. The data collected during this test are used...
The Nitrogen Cycle
Characteristics of Life
The Phosphorus Cycle
The Carbon Cycle

