Ultrasound-assisted leaching of cobalt and lithium from spent lithium-ion batteries

Recovery of cobalt and lithium from spent Li-ion batteries (LIBs) has been studied using ultrasound-assisted leaching. The primary purpose of this work is to investigate the effects of ultrasound on leaching efficiency of cobalt and lithium. The results were compared to conventional leaching. In this study sulfuric acid was used as leaching agent in the presence of hydrogen peroxide. The cathode active materials from spent battery were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM) before and after leaching. Effects of leaching time, leaching temperature, H₂SO₄ concentration, H₂O₂ concentration, solid/liquid ratio, and ultrasonic power have been studied. Optimal leaching efficiency of 94.63% for cobalt, and 98.62% for lithium, respectively, was achieved by using 2 M H₂SO₄ with 5% (v/v) H₂O₂ at a solid/liquid ratio of 100 g/L, and an ultrasonic power of 360 W, and the leaching time being 30 min under 30 °C. Compared with conventional leaching, the ultrasound-assisted leaching gave a higher leaching rate and improved leaching efficiency under the same experimental conditionals. The kinetic analysis of ultrasound-assisted leaching showed that the activation energy of cobalt and lithium were 3.848 KJ/mol and 11.6348 KJ/mol, respectively, indicating that ultrasound-assisted leaching of cobalt and lithium from spent LIBs was controlled by diffusion.