Data on the removal of turbidity from aqueous solutions using polyaluminum chloride
Related Experiment Video
Updated: Feb 5, 2026

Measurement of Particle Size Distribution in Turbid Solutions by Dynamic Light Scattering Microscopy
Published on: January 9, 2017
Sajad Mazloomi1, Soudabeh Ghodsei1, Paria Amraei1
1Department of Environmental Health Engineering, Ilam University of Medical Sciences, Ilam, Iran.
Abstract:
Polyaluminum chloride (PAC) is claimed to be superior to conventional coagulants because of higher removal of particulate and/or organic matters as well as inherent advantages of lower alkalinity consumption and lesser sludge production. 1000 mL of the reaction mixture was examined using parameters, including PAC dose (5-10 mg/L), pH (4-9), and turbidity (1.9 NTU). The content was stirred at 120 rpm for 1 min. Thereafter, the turbidity of water samples was measured using a P2100 turbidimeter. Data indicated that the maximum removal efficiency of turbidity (97.74%) obtained under the PAC doses of 4 and 10, and the pH of 8. There is not a significant relationship between the different dosages of PAC (P-value > 0.05), but the influence of pH on the removal of turbidity was significant (P-value < 0.05). Based on the dataset, the removal efficiency of turbidity was depended on PAC and pH.
Related Concept Videos
Chemical Reactions in Aqueous Solutions
Aqueous Solutions and Heats of Hydration
When ionic compounds dissolve in water, the ions in the solid separate and disperse uniformly throughout the solution because water molecules surround and solvate the ions, reducing the strong electrostatic forces between them. This process...
Leveling Effect and Non-Aqueous Acid-Base Solutions
The Leveling Effect of a Solvent
A generic acid (HA) reacts with the generic base (B-) to yield the corresponding conjugate base (A-) and conjugate acid (HB):
Solution Formation
This selective...
General Properties of Solutions
Ideal Solutions

