Enhanced enzymatic hydrolysis of cellulose from waste paper fibers by cationic polymers addition
Related Experiment Video
Updated: Feb 5, 2026

Manufacturing Of Robust Natural Fiber Preforms Utilizing Bacterial Cellulose as Binder
Published on: May 22, 2014
Hailong Yu1, Yuqin Xu1, Yonghao Ni2
1College of Chemical Engineering, Qingdao University of Science and Technology, Qingdao 266042, China.
Abstract:
Cationic polymers (cationic polyacrylamide (CPAM), polyethyleneimine (PEI) or cationic starch (CS)) were used to enhance the enzymatic hydrolysis of waste paper fibers (WPFs) at 15% (w/w) solids concentration. Results showed that 0.05 g/L PEI, CPAM and CS resulted in 72.5%, 65.9% and 59.7% conversion of WPFs, increased by 15.4%, 8.8% and 2.6%, respectively, compared with control (57.1%). PEI was shown to have a larger effect than CPAM and CS, and generate a total sugar concentration of 73.9 g/L. Improvement in hydrolysis with cationic polymer addition is attributed to increased cellulase adsorption on cellulose through electrostatic attraction, rather than enhancement of cellulase activity. A patching/ bridging mechanism of cationic polymer enhancement of cellulose adsorption in cellulose is hypothesized. PEI exhibited maximum cellulose binding for polymers examined and appears to promote binding through a patching mechanism. CPAM and CS adsorbed a relatively low cellulase through bridging mechanism. In addition, enzyme loading could be reduced by addition of cationic polymers to obtain the same glucose yield, especially when PEI was used.
Related Concept Videos
Hydrolysis
Hydrolysis is a chemical reaction in which the addition of water breaks down a polymer into its simpler monomer units. For example, peptides break into amino acids, carbohydrates into simple sugars, and DNA into nucleotides. Enzymes often facilitate these processes.
Hydrolysis Reverses Dehydration Synthesis
Complex carbohydrates can be broken down by breaking the bonds between individual sugar units. The reaction breaks a glycosidic bond as water is added to the compound. The...
Polymers
Polymers
Hydrolysis of ATP
If one phosphate group is removed, a molecule of ADP—adenosine diphosphate—remains, along with inorganic phosphate. ADP can be further hydrolyzed to AMP—adenosine...
Conjugate Addition (1,4-Addition) vs Direct Addition (1,2-Addition)
Conjugate addition results in a thermodynamically stable product. The reaction retains the stronger C=O bond at the expense of the weaker C=C π bond. The process is slow as the β carbon is less electrophilic than the carbonyl carbon.
Direct addition products are...
Cellulose and Pectic Polysaccharides
As a cell matures, its cell wall specializes according to its type. For example, the...

