Related Experiment Video
Updated: Feb 5, 2026

Fabrication of Robust Nanoscale Contact between a Silver Nanowire Electrode and CdS Buffer Layer in CuIn,GaSe2 Thin-film Solar Cells
Published on: July 19, 2019
Bifacial CdS/CdTe thin-film solar cells with copper nanowires as a transparent back contact
Abstract:
A bifacial CdS/CdTe thin-film solar cell with a superstrate configuration was demonstrated by using copper nanowire (CuNW)/indium tin oxide (ITO) back contacts as a transparent and conductive electrode (TCE). CdS and CdTe were deposited by chemical bath deposition and close-spaced sublimation techniques, respectively. The CuNWs acted both as an acceptor dopant and TCE for the p-CdTe, improving the total cell efficiency compared to a copper-free back contact. CuNW/ITO back contacts with high optical transmittance (72.3% at 550 nm) and low sheet resistance (47.1 Ω/sq.) were obtained. The average cell efficiency of the bifacial CdS/CdTe thin-film cells with the optimized CuNW/ITO back contact was 10.0% (front-side illumination) and 0.55% (rear-side illumination). The quantum efficiencies under front-side and rear-side illumination were studied. The prepared bifacial cell can facilitate full usage of incoming sunlight (direct or diffused), enhancing the output power under cloudy conditions.
Related Concept Videos
Contact-dependent Signaling
Gap Junctions
In animal cells, gap junctions are formed...
Contact Angle
The adhesive force is the molecular force between molecules of different materials, that is, between the molecules of the solid and the liquid. The cohesive...
Transmission-based Precautions I: Contact, Enteric, and Droplets
Contact Precautions:
Contact precautions are the measures taken to prevent the transmission of infectious agents, especially epidemiologically important microorganisms such as MRSA or influenza, primarily transmitted through direct or indirect contact with an...
Cell Potential and Free Energy
Thermodynamics is the branch of physics dealing with the relationship between heat and other forms of energy. In an electrochemical cell, chemical energy is converted into electrical energy.
Thus, a link can be predicted between cell potential, free energy change, and the equilibrium constant for the reaction. Cell potential can also be measured as the oxidant or the reducing strength, and similar acid-base strength measures are reflected in equilibrium...
Voltaic/Galvanic Cells
Spontaneous redox reactions occur abundantly in nature. The chemical reaction occurring in a disposable AA battery powering our remote controls is one such example of a spontaneous redox reaction. Another example is the immersion of coiled copper wire into an aqueous silver nitrate solution. The reaction shows a gradual, visually impressive color change from colorless to bright blue and the formation of a grey precipitate on the copper wire. In this experiment,...
What is Cell Signaling?

