Related Experiment Video
Updated: Feb 5, 2026

Bacterial Cell Culture at the Single-cell Level Inside Giant Vesicles
Published on: April 30, 2019
Giant Magneto-Impedance (GMI) Effect in Single-Layer Soft Magnetic Film Under Stress
1School of Automation, China University of Geosciences, Wuhan, 430074, China.
Abstract:
The stress-induced magnetic anisotropy can significantly affect giant magneto-impedance (GMI) effect of the soft magnetic film. This paper is devoted to the GMI effect of the single layer soft magnetic film implied without and with a stress. By simulating a physical model with MATLAB and COMSOL software, the impedance expression of the single layer soft magnetic film and the relation between external magnetic field and magnetic permeability are deduced. We observed that, without a stress, the sensitive region increased firstly and then decreased with the increasing of the excitation current frequency from 1 MHz to 200 MHz. While the film was subjected to the stress in the direction of the current with one end stressed, the stress on the film was gradually reduced from stressed end to free end. Also, the impedance change rate of the film changed when the stress was added, which is similar to the effect of adding a bias magnetic field on the film. More importantly, the addition of stress σ can induce the bias of the GMI measurement range and improve its sensitivity near zero magnetic fields. This may provide a new way for designing a GMI sensor with higher sensitivity and adjustable measurement range.
Related Concept Videos
Responses to Salt Stress
Impedance Combination
Impedances and Admittance
Impedance is a measure of resistance to sinusoidal current flow in an AC circuit. Unlike their behavior in DC circuits, where inductors appear as short circuits and capacitors as open circuits, the behavior of these components in AC...
Series Impedances: Three-Phase Line
Using Kirchhoff's laws, an integro-differential equation for the network is derived. This equation accounts for unbalanced phase currents, which may induce return currents through neutral wires and the earth, seeking the least impedance path. Earth return conductors can replace the...
Bus Impedance Matrix
In the first circuit, all machine voltage sources are short-circuited, leaving only the prefault voltage source at the fault location. The positive-sequence bus impedance matrix can be determined by solving the nodal equations,...
Line Protection with Impedance Relays
Under normal conditions, low load currents keep the measured...

