Related Experiment Video
Updated: Feb 5, 2026

Fabrication of White Light-emitting Electrochemical Cells with Stable Emission from Exciplexes
Published on: November 15, 2016
Study on the Fabrication of White Organic Light-Emitting Devices Using the Doping Characteristics of Rubrene and
Shumei Li1, Xu Li2, Lizhong Wang2
1Computer College, Jilin Normal University, Jilin Siping 136000, China.
Abstract:
A white organic light emitting device with structure of ITO/2T-NATA(20)/NPBX(15)/DPVBi(15)/ Alq:Rub(10, x)/Alq3(40)/LiF/Al was fabricated using doping rubrene. When the concentration of rubrene is 3 wt.%, the chromaticity is the best (0.319, 0.317), and the color coordinates are stable. When the thickness of the doping layer is 20 nm, the efficiency and luminance of the devices are the highest, which are 5.1022 cd/A and 17130 cd/m2, respectively. On the basis, a test system is consisted of Solomon's OLED display control driver chip SSD1306 and microcontroller AT89C52, which tests the OLED dot matrix through the program to determine whether the matrix has dead point. Through experimental comparison, the test results are consistent with the external power supply test. The system has the characteristics of high efficiency and display characters of dynamic and static pictures, which provides a feasible driving method for the practical application of OLED.
More Related Videos
Related Concept Videos
Characteristics of Series Resonant Circuit
Characteristics of Life
The Wave Nature of Light
Characteristics of Fluids
Characteristics of BJT
For input characteristics, the base-emitter voltage is varied, maintaining a constant collector-emitter voltage. This setup reveals a Shockley-type dependence of the collector current on...
Characteristics of JFET
The core of a JFET's operation is controlling drain current by modulating the gate-source voltage. When the drain and gate voltage are set to zero, the JFET exhibits no net current flow, representing a state of equilibrium. The drain current increases linearly as the...

