Related Experiment Video
Updated: Feb 5, 2026

Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
Removal of inert COD and trace metals from stabilized landfill leachate by granular activated carbon (GAC) adsorption
Ehsan Mohammad-Pajooh1, Ariel E Turcios2, Graham Cuff1
1Institute for Sanitary Engineering and Waste Management, Leibniz University Hannover, Appelstr. 9a, D-30167 Hannover, Germany.
Abstract:
Landfills in Germany are currently approaching stabilization phase; as a result removal of inert organics and potentially toxic elements in the leachate is becoming a primary concern. Dissolved air floatation (DAF) at the secondary stage reduces only 27% of the residual chemical oxygen demand (COD) in the investigated treatment systems; downstream granular activated carbon (GAC) units are required to further reduce COD concentration by 40-56% to meet indirect discharge or direct discharge limits respectively. Therefore, in this study performance in terms of COD and trace metals adsorption of different types of granular activated carbon were compared over different contact times and dosages. GAC 1 with Brunauer-Emmett-Teller (BET) surface area of 719.5 ± 2.1 m2/g and average pore diameter (D) of 4.81 nm was identified to be inappropriate for treatment of leachate from this landfill. GAC 2 (with BET of 1513.7 ± 6.4 m2/g and D of 3.50 nm) was feasible for COD reduction from DAF-pretreated leachate, while GAC 3 (with BET of 644.5 ± 2.6 m2/g and D of 5.65 nm) can be coupled either with biological step alone, or as a tertiary step after the DAF unit. Moreover, as COD is the primary remaining contaminant of interest after secondary and tertiary treatment, spectrometer probes provide a close estimation of COD concentration for use in online monitoring. Beside COD removal, GAC 3 also confirmed the effectiveness of trace metals adsorption even at trace level, as it removed 66, 64, 48, 47, 43, and 25% of copper, cobalt, chromium, manganese, nickel, and zinc, respectively.
More Related Videos
08:21Optimized Procedure for Determining the Adsorption of Phosphonates onto Granular Ferric Hydroxide using a Miniaturized Phosphorus Determination Method
Published on: May 18, 2018
10:44Preparation of Biomass-based Mesoporous Carbon with Higher Nitrogen-/Oxygen-chelating Adsorption for CuII Through Microwave Pre-Pyrolysis
Published on: February 12, 2019
Related Concept Videos
RNA Stability
Metal-Ligand Bonds
In these complexes, transition metals form coordinate covalent bonds, a kind of Lewis acid-base interaction in which both of the electrons in the bond are contributed by a donor (Lewis base) to an electron acceptor (Lewis acid). The Lewis acid in...
Nuclear Stability
To hold positively charged protons together...
Analyte Adsorption and Distribution
The Carbon Cycle
Bonding in Metals