A method for determining density based on gamma ray and fast neutron detection using a Cs₂LiYCl₆ detector in...

With the increasing demand for radioisotope-free operations, pulsed neutron-gamma density (NGD) has become increasingly important for logging-while-drilling (LWD) development. However, current NGD tools, adopting the multiple-detector array design, are not conducive to the simplification of instrument design and measurement system. To break obstacles, based on the fast neutron-gamma coupled theory, a new density measurement method was proposed. Further, combined with the neutron-gamma simultaneous detection characteristics of the Cs₂LiYCl₆ (CLYC) detector, an NGD measurement system consisting of a D-T source and one CLYC detector was used. Results show that the new method is capable of determining formation density using a single CLYC detector, which can not only avoid complex instrument systems but also improve density sensitivity. Moreover, the applicability of the new density method was well verified by Monte Carlo simulation. Additionally, the method was successfully applied in a simulated well, and density results are in good agreement with the benchmarked formations. The research provides theoretical guidance for NGD instrument design.