In situ polymer flocculation and growth in Taylor-Couette flows

Flocculation of small particulates suspended in solution is a key process in many industries, including drinking water treatment. The particles are aggregated during mixing to form larger aggregates, known as flocs, through use of a polyelectrolyte flocculant. The flocculation of these particulates in water treatment, however, are subject to a wide spatial variation of hydrodynamic flow states, which has consequences for floc size, growth rate, and microstructure. Floc assembly dynamics are explored here using a commercially available cationic polyacrylamide, commonly used in water treatment, and anisotropic Na-bentonite clay particles under a variety of hydrodynamic mixing conditions. A Taylor-Couette cell with the unique ability to radially inject fluid into the rotating annulus was used to study how specific hydrodynamic flow fields affect assembly and structure of these materials during the flocculation process. Faster floc growth rates and decreased floc fractal dimensions were observed for higher order flow states, indicating improved mass transfer of the polymer flocculant and breakage at the edges of the flocs (shear rounding), respectively. This work sheds more light on the complexities of polymer-induced flocculation, towards improving dosing and efficiency of large-scale operations.