Related Experiment Video
Updated: Feb 3, 2026

Femtosecond Laser Filaments for Use in Sub-Diffraction-Limited Imaging and Remote Sensing
Published on: April 25, 2019
Enhancement of the Performance and Data Processing Rate of an Optical Frequency Domain Reflectometer Distributed
Kunpeng Feng1,2, Jiwen Cui3, Yihua Jin4
1Institute of Ultra-precision Optoelectronic Instrument Engineering, Science Park, Harbin Institute of Technology, Harbin 150080, China. aifenglin@gmail.com.
Abstract:
A novel optical frequency domain reflectometer (OFDR) processing algorithm is proposed to enhance the measurable range and data processing rate using a narrow swept spectrum range and reducing the time consuming of the process distributed sensing results. To reduce the swept wavelength range and simultaneously enhance strain measurable range, the local similarity characteristics of Rayleigh scattering fingerprint spectrum is discovered and a new similarity evaluation function based on least-square method is built to improve the data processing rate and sensing performance. By this method, the strain measurable range is raised to 3000 µε under a highest spatial resolution of 3 mm when the swept spectrum range is only 10 nm and the data processing rate is improved by at least 10 times. Experimental results indicate that a nonlinearity of less than 0.5%, a strain resolution of better than 10 µε, a repeatability at zero strain of below ±0.4 GHz and a full-scale accuracy is lower than 0.85 GHz under a highest spatial resolution of 3 mm can be achieved. Advantages of this method are fast processing rate, large strain measurable range, high SNR, and applicability with current OFDR systems.
Related Concept Videos
Variation: Normal Distribution, Range, and Standard Deviation
What is a Frequency Distribution
Mean From a Frequency Distribution
When such a data set is encountered,...
Construction of Frequency Distribution
First, make a table with two columns—one with the title of the data that needs to be organized, and the other column for frequency. [Draw a third column for tally marks if needed]. Then, take a look at the items given in the data set and decide if an ungrouped frequency distribution table or a grouped frequency distribution table would be more suitable. If there are large sets of different values, then it is...
Percentage Frequency Distribution
The process of making a percentage frequency distribution involves the following few steps: note the total number of observations;...
Linear Approximation in Frequency Domain
In contrast, nonlinear systems do not inherently possess these properties. However, for small deviations around an operating point, a nonlinear system can often be approximated as linear....

