Related Experiment Video
Updated: Feb 2, 2026

Label-free Single Molecule Detection Using Microtoroid Optical Resonators
Published on: December 29, 2015
Integration of an Optical Ring Resonator Biosensor into a Self-Contained Microfluidic Cartridge with Active,
Sascha Geidel1, Sergio Peransi Llopis2, Manuel Rodrigo3
1Fraunhofer Institute for Electronic Nanosystems (ENAS), Technologie-Campus 3, 09126 Chemnitz, Germany. sascha.geidel@enas.fraunhofer.de.
Abstract:
While there have been huge advances in the field of biosensors during the last decade, their integration into a microfluidic environment avoiding external tubing and pumping is still neglected. Herein, we show a new microfluidic design that integrates multiple reservoirs for reagent storage and single-use electrochemical pumps for time-controlled delivery of the liquids. The cartridge has been tested and validated with a silicon nitride-based photonic biosensor incorporating multiple optical ring resonators as sensing elements and an immunoassay as a potential target application. Based on experimental results obtained with a demonstration model, subcomponents were designed and existing protocols were adapted. The newly-designed microfluidic cartridges and photonic sensors were separately characterized on a technical basis and performed well. Afterwards, the sensor was functionalized for a protein detection. The microfluidic cartridge was loaded with the necessary assay reagents. The integrated pumps were programmed to drive the single process steps of an immunoassay. The prototype worked selectively, but only with a low sensitivity. Further work must be carried out to optimize biofunctionalization of the optical ring resonators and to have a more suitable flow velocity progression to enhance the system's reproducibility.
Related Concept Videos
Resonance
Properties of Enantiomers and Optical Activity
Integration by Parts: Indefinite Integrals
Integration by Parts: Definite Integrals
Series Resonance
Integrator and Differentiator
An integrator within an op-amp circuit produces an output directly proportional to the integral of the input signal. This is achieved by replacing the feedback resistor in a typical inverting...

