The European baseline series and recommended additions: 2019

Measurement is an indispensable part of analytical chemistry. The result of measurement helps quantify a substance's physical property and compare it with the physical property of another substance. Each measurement comprises two components - a number indicating the magnitude and a unit of measurement as a standard for comparison. Further, the same quantity can be measured using different units of measurement, which leads to differences in magnitude.
A standard set of units has been defined...

α,β-Unsaturated carbonyl compounds with two electrophilic sites, the carbonyl carbon, and the β carbon, are susceptible to nucleophilic attack via two modes: conjugate or 1,4-addition and direct or 1,2-addition.
Conjugate addition results in a thermodynamically stable product. The reaction retains the stronger C=O bond at the expense of the weaker C=C π bond. The process is slow as the β carbon is less electrophilic than the carbonyl carbon.
Direct addition products are...

A resistor is an ohmic device that limits the flow of charge in a circuit. Most circuits have more than one resistor. If several resistors are connected together and connected to a battery, the current supplied by the battery depends on the equivalent resistance of the circuit. The equivalent resistance of a combination of resistors depends on both their individual values and how they are connected. The simplest combination of resistors is the series combination. 
In a series circuit, the...

The attack of a nucleophile at the β carbon of an α,β-unsaturated carbonyl compound is called conjugate addition. Conjugate addition reactions of active methylene compounds, such as β-diketones, β-keto esters, β-keto nitriles, and α-nitro ketones, are called Michael addition reactions.

The RLC circuit impedance is defined as the ratio of the supply voltage to the circuit current. Resonance in such a circuit occurs when the imaginary part of this impedance equals zero. This specific condition means that the inductive reactance is exactly equal to the capacitive reactance. The frequency at which this happens is known as the resonant frequency. Mathematically, the resonant frequency is inversely proportional to the square root of the product of the inductance (L) and capacitance...

Capacitors, fundamental components in electronic circuits, can be connected in series and/or parallel configurations. Each configuration has different impacts on the overall behavior of the circuit.
First, consider capacitors connected in series to a battery. In this configuration, the plate connected to the battery's positive terminal develops a positive charge, while the plate attached to the negative terminal becomes negatively charged. An equal magnitude of charge is induced on the...