Related Experiment Video
Updated: Feb 2, 2026

Production of Single Tracks of Ti-6Al-4V by Directed Energy Deposition to Determine the Layer Thickness for Multilayer Deposition
Published on: March 13, 2018
Microstructure, mechanical properties and springback behaviour of Ti‑6Al‑4V alloy connection rod for spinal fixation
Qiaochu Li1, Xiaohua Min1, Pengfei Bai1
1School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024, PR China.
Abstract:
The effect of annealing condition on microstructure, mechanical properties and springback behaviour was examined in the connection rod of Ti-6Al-4V alloy for spinal fixation devices. Compared with the deformed microstructure in the sample before annealing, relatively few equiaxed grains were present after annealing at 1003 K after 1.8 ks, and a considerable amount appeared at 7.2 ks. When annealing time was extended to 36 ks, the recrystallised grains further grew. Vickers hardness, tensile strength and bending strength decreased with increasing annealing time, whereas the elastic and bending moduli showed no significant change with annealing time of up to 7.2 ks and then slightly decreased at 36 ks. The springback ratio was closely associated with strength and modulus and applied bending deflection. The springback ratio reached the highest and lowest values in the sample before and after annealing for 7.2 ks, respectively. A good combination of strength, modulus and springback ratio was obtained in the sample after annealing for 7.2 ks.
Related Concept Videos
Fixation and Sectioning
The simplest type of preparation is the wet mount, in which the specimen is placed in a drop of liquid on the slide. A liquid specimen can be directly deposited on the slide using a dropper. Solid specimens, such as skin scraping, can be placed on the slide before adding a drop of liquid to prepare the wet mount. Sometimes the liquid is simply water, but stains are often added...
Dietary Connections
Carbon-dioxide Fixation
Physical and Chemical Properties of Matter
Introduction to Connective Tissues
Classification of Connective Tissues
Connective Tissue Proper
Connective tissue proper is the most abundant class of connective tissues. As its name implies, it predominantly connects different tissues in the body. Depending on the cell types, ground substance, viscosity, and fiber types in the ECM, connective tissue proper is further categorized into loose and dense....

