UWB Bandpass Filter with Dual Notched Bands Using T-Shaped Resonator and L-Shaped Defected Microstrip Structure

In this paper, an ultra-wideband (UWB) bandpass filter (BPF) with dual notched bands using a T-shaped resonator and L-shaped defected microstrip structure (DMS) is proposed and fabricated. First, the principle of generating notched bands by using a T-shaped resonator and L-shaped defected microstrip structure to determine the size parameters of the structure is analyzed. High frequency structure simulator (HFSS) software is used to analyze the performance of the filter, and advanced design system (ADS) is used to extract the equivalent circuit model parameters. The two simulation results are consistent, which further verifies the correctness of the circuit model. Finally, the filter is fabricated and measured. The measured results are in good agreement with simulated results, demonstrating good insertion loss and return loss. The proposed filter has dual independently controllable notched bands which are implemented by coupling the T-shaped resonator to the transmission line and by etching the L-shaped defected microstrip structure respectively. The proposed filter can suppress dispensable bands at 3.5 GHz and 7.5 GHz in WiMAX band and X-band to improve the performance of the ultra-wideband communication system. By adjusting the parameters of the T-shaped resonator and L-shaped defected microstrip structure, the UWB bandpass filter with dual notched bands working at WiMAX band and X-band can be designed and applied to the wireless communication system.