Related Experiment Video
Updated: Feb 2, 2026

Breakfast Habits among Schoolchildren in the City of Uruguaiana, Brazil
Published on: July 29, 2020
External control of fluoridation in public water supply systems in the state of Goiás, Brazil
Paulo Sérgio Scalize1, Roberta Vieira Nunes Pinheiro1, Humberto Carlos Ruggeri Junior2
1Programas de Pós- Graduação em Engenharia Ambiental e Sanitária e Ciências Ambientais, Universidade Federal de Goiás . Av. Universitária 1488, Setor Universitário. 74605- 220 Goiânia GO Brasil . pscalize.ufg@gmail.com.
Abstract:
The addition of fluoride to the public water supply is a method used for reducing tooth decay. In this sense, the control of fluoridation is important for maintaining its efficiency and, at the same time, for avoiding the risk of fluorosis as a result of the consumption of water with excess of fluoride. The objective of this study was to evaluate the adequacy of fluoride levels in the water distributed to populations of the state of Goiás, Brazil. Towards this aim, 5,039 water samples collected between 2011 and 2013 in 225 municipalities of the state of Goiás were analyzed for fluoride level. The results were assessed with regard to season, type of water source and geographic location. Fluoride levels were found to vary between complete absence and 2.5 mg F/L, with 28.2% of the samples being between 0.6 and 0.8 mg F/L, and 39.1% between 0.55 and 0.84 mg F/L. The rainy season produced a greater number of atypical results and higher values than the dry period. The systems supplied by groundwater sources were shown to have a limited control of fluoride concentration compared to systems supplied by surface water sources. Lower concentrations of fluoride were found in samples collected in the North and East Mesoregions of Goiás, with less than 7.5% being between 0.6 and 0.8 mg F/L, which systems are mainly supplied by groundwater sources with fluoride addition .
More Related Videos
Related Concept Videos
Control Systems
At the heart...
Control Systems: Applications
In modern vehicles, control systems manage various functions to enhance performance and safety. The steering wheel and accelerator are primary inputs in a car's control system. The...
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal...
Transfer Function in Control Systems
To derive the transfer function, consider a general nth-order linear time-invariant...
Work Done on a System by External Force
In the presence of a non-conservative opposing force, like friction, some part of the work done...

