Ultrasound assisted preparation, characterization and adsorption study of ternary chitosan-ZnO-TiO₂ nanocomposite:...

In the present work, the synthesis of ternary chitosan/zinc oxide/titanium dioxide (CTS-ZnO-TiO₂) nanocomposite was carried out with the use of mechanical stirring (conventional) and ultrasound assisted method. The characterization of prepared CTS-ZnO-TiO₂ adsorbent was carried out using XRD, TEM, FTIR and the results of these analysis methods proved the successful preparation of ternary nanocomposite. Crystal violet (CV) dye was used as a pollutant to observe the adsorption ability of the prepared nanocomposite and the nanocomposite prepared by ultrasonic-assisted method proved to be a better adsorbent. The CV dye adsorption was significant for CTS-ZnO-TiO₂ nanocomposite synthesized with the use of ultrasound assisted method compared to that prepared by conventional method. It is due to the physical effects of the ultrasonic irradiations due to which formation of finely dispersed nanocomposite takes place than that by conventional method. For batch adsorption the effect of various operating parameters such as initial dye concentration, time, temperature and adsorbent dose has been evaluated. The obtained data were processed using isotherm models, adsorption kinetics and the thermodynamic behavior of the cationic dye adsorption was also studied. The isotherm data was correlated reasonably well by the Temkin adsorption isotherm. Pseudo-second-order kinetic model provided a better correlation for the experimental data compared to pseudo first order, Elovich model and power function kinetics model. Thermodynamic parameters for adsorption indicated that the dye adsorption was spontaneous and endothermic in nature.