Related Experiment Video
Updated: Feb 1, 2026

Automation of Mode Locking in a Nonlinear Polarization Rotation Fiber Laser through Output Polarization Measurements
Published on: February 28, 2016
Narrowing spectral linewidth in passively mode-locked solid-state lasers
Abstract:
A novel scheme to realize a mode-locked laser with a narrow spectral linewidth is demonstrated by exploiting a reflected Fabry-Perot (FP) cavity to introduce an intense FP effect. Stable continuous-wave mode-locked operation is achieved with the repetition rate of 48 MHz and the maximum average output power of 2.6 W under an incident pump power of 11.9 W. The mode-locked pulse width is systematically investigated by varying the optical thickness of the reflected FP cavity. The pulse duration is experimentally found to be in a range of 0.8 to 2.6 ns. The experimental results reveal that the reflected FP cavity is the key factor leading to the pulse generation in the nanosecond regime. This Letter is believed to provide a promising method for generating optical pulses with narrow spectral linewidths.
More Related Videos
Related Concept Videos
Metallic Solids
All metallic solids exhibit high thermal and electrical conductivity, metallic luster, and malleability....
Structures of Solids
Self-Locking Screw
A square-threaded screw jack carrying a load is considered self-locking if the screw retains its position even after the moment applied to it is removed.
What is a Mode?
There can be more than one mode in a data set if multiple values have the same highest frequency. For instance, suppose that the Statistics exam scores of 20 students are: 50; 53; 59; 59; 63; 63; 72; 72; 72; 72; 72; 76; 78; 81; 83; 84; 84; 84; 90; 93. Here, the mode is 72, as it occurs most frequently, five times.
A data set with two modes is called bimodal. For example,...
Passive Filters
Low-Pass Filters
Low-pass filters are designed to transmit signals with frequencies lower than the cutoff frequency, ωc, and attenuate those above it. The cutoff...
Network Covalent Solids
To break or to melt a covalent network solid, covalent bonds must be broken. Because covalent bonds are relatively strong, covalent network solids are typically...

