Efficient DMSO-Vapor Annealing for Enhancing Thermoelectric Performance of PEDOT:PSS-Based Aerogel

Conducting polymer-based composite aerogel film is desired to be used as thermoelectric (TE) materials due to its good flexibility and ultralow thermal conductivity. Here, we proposed the simple freeze drying method to fabricate free-standing poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT:PSS)-based aerogel films without any crosslinker addition. The evolutions of morphology and TE performance were systemically investigated with various organic solvent addition. Furthermore, a series of the PEDOT:PSS/tellurium nanowires (Te-NWs) composite aerogel films was prepared, and the relationship between the structure and the charge-transport mechanism of the binary complex system was explored based on series and parallel models. Finally, an efficient dimethyl sulfoxide-vapor annealing was employed to further optimize the TE performance of PEDOT:PSS/Te-NWs composite aerogel films. The ZT value was estimated to be 2.0 × 10^-2 at room temperature. On the basis of the flexibility and highly enhanced TE performance, a prototype TE generator consisting of p-type PEDOT:PSS/Te-NWs aerogel films and n-type carbon nanotube fibers as legs has been fabricated with an acceptable output power of 1.28 μW at a temperature gradient of 60 K, which could be potentially applied in wearable electronics.