Related Experiment Video
Updated: Jan 31, 2026
Research and Development of High-performance Explosives
Published on: February 20, 2016
Numerical assessment of the human body response to a ground-level explosion
Piotr W Sielicki1, Tomasz Gajewski1
1a Institute of Structural Engineering, Poznan University of Technology , Poznan , Poland.
Abstract:
This paper presents the results of a numerical analysis of the behaviour of a human body after a ground-level explosion. The explosions were generated by condensed charges for different stand-off distances and various masses of explosive. The detonations points were located at distances of 1.0 and 2.0 meters from the dummy (human model) obstacle. The different masses of spherically-shaped TNT charges (0.4-1.0 kg) were initiated centrally. The blast wave propagation was generated using a coupled numerical design, which included Eulerian and Lagrangian descriptions for different domains, i.e. the dummy, air, and explosive domains. The main objective of this work was to present the actual pressures and accelerations around the dummy and the body motion caused by the rapid shock of the pressure action. Reaction forces and moments of anatomical joints were provided. Furthermore, the safety criteria presented in the official standards were compared to the simulation results. In this research, different positions against the loading masses were analysed. In each analysis the same standing human model was used. The dummy geometry was based on a medium size male (1.79 m, 84.8 kg). The human body was modelled as consisting of separate, rigid parts (with adequate masses and inertia moments) connected by joints exhibiting nonlinear behaviour. Anatomical ranges of motion were taken into consideration, and a dedicated numerical technique was proposed to model the resistance moment vs. the range of motion relations for the most important human body joints.
Related Concept Videos
01:24Numerical Calculations
The solution to a problem is obtained using different methods. While manually solving algebraic symbols is one of the most common methods, the graphical method is often preferred. Computers...
01:27Assessing Body Temperature - Rectal
Follow these steps for rectal temperature assessment:
Step 1: Perform hand hygiene and don clean gloves to prevent cross-infection.
Step 2: Position the patient in a side-lying position to better visualize the rectal...
01:14Assessing Body Temperature - Oral
Step 1:
Start by practicing proper hand hygiene to prevent the spread of microorganisms.
Step 2:
Take the thermometer out of the charging unit, switch it on, and wait for the ready sign.
Step 3:
Gently slide the probe cover until a click is heard. This simple action prevents cross-contamination and ensures the correct placement of the probe cover.
Step 4:
Instruct the patient to open their mouth and place...
01:14Assessing Body Temperature - Axilla
Step 1: Perform hand hygiene and put on clean gloves to maintain infection control and prevent cross-contamination.
Step 2: Prepare the patient by explaining the procedure to ensure understanding and cooperation. Ensure privacy, expose the axilla, and inform the patient that minimal movement is crucial for an accurate reading.
Step 3: Adjust the patient’s clothing to expose only the axilla. It minimizes...
01:28Role of Proteins in the Human Body
01:14Assessing Body Temperature - Tympanic membrane
Step 1: Begin by practicing good hand hygiene to prevent the transmission of microorganisms.
Step 2: Turn on the thermometer and wait until the ready sign appears on the screen to ensure accurate measurement.
Step 3: Slide the probe cover in place to prevent cross-contamination.
Step 4: Instruct the patient to tilt their head to the side for comfort and check for cerumen...