[Characteristics of Ammonia Adsorption and Kinetics by Nitrifying Sludge Immobilized Pellets]

In order to explore the characteristics and mechanisms of ammonia adsorption by both nitrifying sludge waterborne polyurethane (WPU)-immobilized pellets and nitrifying sludge polyvinyl alcohol-sodium alginate (PVA-SA)-immobilized pellets, the ammonia adsorption characteristics of immobilized pellets under different initial ammonia concentrations, and the influences of temperature, pH, and salinity on ammonia adsorption were studied respectively. Moreover, the adsorption isotherms, thermodynamics, and kinetics model analysis were employed to investigate the adsorption process. The adsorption capacity increased as the initial ammonia concentration increased. The optimal pH was 7.0, and salinity and temperature exhibited an inhibitory effect on adsorption. The adsorption capacity for nitrifying sludge-immobilized pellets was higher than the pellets with no sludge; the adsorption capacity of WPU pellets was higher than that of PVA-SA pellets. The thermodynamics demonstrated that the adsorption process was a spontaneous exothermic process and that low temperature favored ammonia adsorption. The process was fitted to the Langmuir and Freundlich isotherm. It exhibited multilevel adsorption at higher energy (Freundlich isotherm) and single adsorption at lower energy by electrostatic force (Langmuir isotherm). Additionally, the process was consistent with the pseudo-second-order kinetic model, as it explained that chemical adsorption was the primary mechanism of ammonia adsorption by immobilized pellets.