Related Experiment Video
Updated: Jan 30, 2026

Iron Nanowire Fabrication by Nano-Porous Anodized Aluminum and its Characterization
Published on: October 6, 2019
Study of peak capacities generated by a porous layered radially elongated pillar array column coupled to a nano-LC
Shunta Futagami1, Takeshi Hara, Heidi Ottevaere
1Department of Chemical Engineering, Vrije Universiteit Brussel, Pleinlaan 2, 1050 Brussels, Belgium. Wim.De.Malsche@vub.be.
Abstract:
The performance of a porous-layered radially elongated pillar (PLREP) array column in a commercial nano-LC system was examined by performing separation of alkylphenones and peptides. The mesoporous silica layer was prepared by sol-gel processing of a mixture of tetramethoxysilane and methyltrimethoxysilane on REPs filling a 16.5 cm long, 1 mm wide channel (three lanes of 5.5 cm long channels connected by turns). The minimum plate height of 1.4 μm for octanophenone (k = 2.21) observed in isocratic mode is 5 times smaller than the smallest off-column plate height previously reported for porous pillar array columns for a retained component. This advantage is related to the earlier introduced shape of the radially elongated pillar bed that outperforms the cylindrically shaped pillar bed in terms of the plate height. In gradient mode, maximum conditional peak capacities of 220 (for a mixture of thiourea and 7 alkylphenones, tG = 180 min) and 160 (for a cytochrome c digest, tG = 150 min) were obtained. These results indicate excellent potential for implementation of this sol-gel layer in pillar array column formats.
Related Concept Videos
Transcription Elongation Factors
The transcription elongation is regulated via pausing of RNA polymerase on several occasions during transcription. In bacteria, these halts are necessary because the transcription of DNA into mRNA is coupled to the translation of that mRNA...
Transcription Elongation Factors
Lung Capacity
Radial System Protection
In a radial system with a fault downstream of the third breaker, ideally, only the third breaker will open, isolating the fault and interrupting the load connected beyond it. The second breaker has a longer delay setting,...
Assessment of radial pulse
The radial pulse, located at the wrist, is often the preferred site for assessing peripheral pulse because of its accessibility and dependability. The process of determining the radial pulse involves several steps:
IR Spectrum Peak Splitting: Symmetric vs Asymmetric Vibrations

