Selective morphological analysis of cerium metal in electrodeposit recovered from molten LiCl-KCl eutectic by...

This paper presents, for the first time, a study to analyze the surface morphology of metal extracted from a high temperature molten salt medium in the electrodeposit using x-ray radiography and computed tomography. Widely used methods such as scanning electron microscopy and inductively coupled plasma-optical emission spectrometry/mass spectrometry are destructive and the related processes are often subject to the air condition. The x-ray imaging can provide rich information of the target sample in a non-destructive way without invoking hydrolysis or oxidation of a hygroscopic sample. In this study, the x-ray imaging conditions were optimized as following: tube voltage at 100 kVp and the current exposure time product at 8.8 mAs in our in-house x-ray imaging system. LiCl-KCl and cerium metals used in this work produced substantially distinguishable contrasts in the radiography due to their distinctive attenuation characteristics, and this difference was well quantified in the histograms of brightness. Electrodeposits obtained by chronoamperometry and chronopotentiometry demonstrated a completely different behavior of electrodeposition even at the same applied charge. In particular, computed tomography and volumetric analysis clearly showed the structural and morphological dissimilarity. The structure of cerium metal in the electrodeposit was successfully separated from the chloride salt structure in the CT image by an image segmentation process.