Related Experiment Video
Updated: Jan 29, 2026

Removal of Arsenic Using a Cationic Polymer Gel Impregnated with Iron Hydroxide
Published on: June 28, 2019
[Evaluation of the arsenic removal in superficial waters using home filters]
Guillermo F Villa-Gonzales1, Carlos Huamaní-Pacsi1, Manuel Chávez-Ruiz1
1. Instituto Nacional de Salud. Lima, Perú.
Abstract:
The objective of the study was to evaluate home filters to remove arsenic present in waters coming from the Sama river. The system consisted of a traditional sand filter and a filter with the adsorbent zerovalent iron material stabilized in quitosan. The evaluation of the system lasted for a period of 12 weeks in 18 points of usage; the first eight weeks the arsenic concentration of the filtered water was determined using reactive strips, and the last four assessment was made through atomic absorption spectrometry (AAS). During the first eight weeks the arsenic concentration was reduced in a range of 0.005 and 0.025 mg/L, and during the last four weeks in the range of 0.001 and 0.052 mg/L, from an average concentration of 0.51 mg/L. This research showed that the filtration system is efficient to remove arsenic to natural conditions.
More Related Videos
08:04Use of a Filter Cartridge for Filtration of Water Samples and Extraction of Environmental DNA
Published on: November 25, 2016
09:23Removal of Trace Elements by Cupric Oxide Nanoparticles from Uranium In Situ Recovery Bleed Water and Its Effect on Cell Viability
Published on: June 21, 2015
Related Concept Videos
Passive Filters
Low-Pass Filters
Low-pass filters are designed to transmit signals with frequencies lower than the cutoff frequency, ωc, and attenuate those above it. The cutoff...
Active Filters
States of Water
Water freezes when the intermolecular forces are greater than the kinetic energy. Unlike most other substances, water is less dense in its solid state than in its liquid state. This is because each water molecule can form...
The Water Cycle
Water and Mineral Acquisition
Quality of Water