Related Experiment Video
Updated: Aug 6, 2026

Casting Protocols for the Production of Open Cell Aluminum Foams by the Replication Technique and the Effect on Porosity
Published on: December 11, 2014
Glass-Ceramic Foams from 'Weak Alkali Activation' and Gel-Casting of Waste Glass/Fly Ash Mixtures
Acacio Rincón Romero1, Nicoletta Toniolo2, Aldo R Boccaccini3
1Department of Industrial Engineering, University of Padova, Via Marzolo 9, Padova 35131, Italy. acacio.rinconromero@unipd.it.
Abstract:
A 'weak alkali activation' was applied to aqueous suspensions based on soda lime glass and coal fly ash. Unlike in actual geopolymers, an extensive formation of zeolite-like gels was not expected, due to the low molarity of the alkali activator (NaOH) used. In any case, the suspension underwent gelation and presented a marked pseudoplastic behavior. A significant foaming could be achieved by air incorporation, in turn resulting from intensive mechanical stirring (with the help of a surfactant), before complete hardening. Dried foams were later subjected to heat treatment at 700⁻900 °C. The interactions between glass and fly ash, upon firing, determined the formation of new crystal phases, particularly nepheline (sodium alumino⁻silicate), with remarkable crushing strength (~6 MPa, with a porosity of about 70%). The fired materials, finally, demonstrated a successful stabilization of pollutants from fly ash and a low thermal conductivity that could be exploited for building applications.
Related Concept Videos
Pozzolans
Fly ash is a...
Additives and Fillers in Concrete
The...
Alkali Aggregate Reaction in Concrete

