Canal transportation and centering ratio after preparation in severely curved canals: analysis by micro-computed...

This study compared canal transportation and centering ratio produced after instrumentation with a single heat-treated reciprocating system, WaveOne Gold (WOG; Dentsply Sirona, Tulsa, OK, USA) and a single heat-treated rotary instrument, XP-endo Shaper (XPS; FKG, La Chaux-de-Fonds, Switzerland), using micro-computed tomographic (micro-CT) imaging, and evaluated the ability of double-digital radiography (DDR) to detect canal transportation.

Mesial root canals of mandibular molars with severe curvature (25-70°) were randomly assigned to either WOG or XPS groups for preparation. Centering ratio was measured by micro-CT imaging, while canal transportation was measured by micro-CT and DDR methods at 3, 5, and 7 mm from the apex. Data were statistically compared between groups using the t test (α = 5%).

The micro-CT method showed that XPS's shaping ability regarding the centering ability (P = 0.030) and canal transportation (P = 0.028) was significantly better than WOG only at the 7-mm level. The DDR technique detected no difference in canal transportation between groups at any level (P > 0.05); however, a significant difference between evaluation methods was detected at the 5-mm level in the WOG group (P = 0.023).

Micro-CT technique revealed a significantly better centering ability and less canal transportation with XPS compared to WOG. The DDR technique was not capable of detecting the significant difference between the tested groups.

Root canal curvatures may lead to procedural errors during endodontic treatment. Thus, differences on the shaping ability of single heat-treated reciprocating and rotary systems should be known.