Related Experiment Video
Updated: Jan 27, 2026

Simulation, Fabrication and Characterization of THz Metamaterial Absorbers
Published on: December 27, 2012
High fabrication-tolerant narrowband perfect graphene absorber based on guided-mode resonance in distributed Bragg
Sangjun Lee1, Hyungjun Heo1, Sangin Kim2
1Department of Electrical and Computer Engineering, Ajou University, Suwon, South Korea.
Abstract:
We propose the narrowband perfect absorbers with enormously high fabrication tolerance, which consists of a low-contrast grating and a finite distributed Bragg reflector (DBR) layer with an ultrathin absorbing medium (graphene). It is numerically shown that the proposed perfect absorber outperforms the previously proposed schemes in fabrication tolerance. According to the rigorous coupled wave analysis (RCWA) and coupled mode theory (CMT) fitting, over a considerably wide range of grating width and thickness, the proposed absorber provides a proper ratio of leakage rate to loss rate while preserving resonant condition, so that almost perfect absorption (>99.9%) can be obtained. This result is attributed to the strong electric field confinement in the DBR region rather than the grating layer owing to lower index of grating compared to DBR. In addition, without degrading the fabrication tolerance, the bandwidth of the proposed absorber can be controlled by the DBR thickness (the number of pairs) and a narrow absorbing bandwidth of sub-nanometer is achieved with 8.5 Si/SiO2 pair stacked DBR.
Related Concept Videos
Resonance
What is a Mode?
There can be more than one mode in a data set if multiple values have the same highest frequency. For instance, suppose that the Statistics exam scores of 20 students are: 50; 53; 59; 59; 63; 63; 72; 72; 72; 72; 72; 76; 78; 81; 83; 84; 84; 84; 90; 93. Here, the mode is 72, as it occurs most frequently, five times.
A data set with two modes is called bimodal. For example,...
Catalytically Perfect Enzymes
Most enzymes...
Ventilatory Modes
There are three ventilatory modes: full support, partial support, and spontaneous. These are described below.
Full Support Modes
Full support modes include controlled mechanical ventilation, continuous mandatory...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
Modes of Standing Waves: II
For a tube open at one end and closed at the other filled with air, the modes are such that there is always an antinode at the open end and a node at the closed end....

