Related Experiment Video
Updated: Jan 27, 2026

Physical, Chemical and Biological Characterization of Six Biochars Produced for the Remediation of Contaminated Sites
Published on: November 28, 2014
Experimental and numerical evaluation of Groundwater Circulation Wells as a remediation technology for persistent,
Fabio Tatti1, Marco Petrangeli Papini2, Vincenzo Torretta3
1Department of Civil, Building and Environmental Engineering (DICEA), Sapienza University of Rome, Via Eudossiana 18, Rome 00184, Italy.
Abstract:
Contaminants removal stoked inside low permeability zones of aquifers is one of the most important challenge of groundwater remediation process today. Low permeability layers can be considered persistent secondary sources of contamination because they release pollutants by molecular diffusion after primary source of contamination is reduced, causing long plum tails (Back-Diffusion). In this study, the Groundwater Circulation Well (GCW) system was investigated as an alternative remediation technology to the low efficient traditional pumping technologies to restore contaminated low permeability layers of aquifers. The GCW system creates vertical groundwater circulation cells by drawing groundwater through a screen of a multi-screen well and discharging it through another screen. The suitability of this technology to remediate contaminated low permeability zones was investigated by laboratory test and numerical simulations. The collected data were used to calibrate a model created to simulate the Back-Diffusion process and to evaluate the effect of different pumping technologies on the depletion time of that process. Results show that the efficiency of the GCW is dependent on the position and on the geometry of the low permeability zones, however the GCW system appears more suitable to restore contaminated low permeability layers of aquifers than the traditional pumping technology.
Related Concept Videos
Hybrid Zones
Numerical Calculations
The solution to a problem is obtained using different methods. While manually solving algebraic symbols is one of the most common methods, the graphical method is often preferred. Computers...
Pilot and Numeric Relaying
Contaminants and Errors
Another key consideration is determining the appropriate number of samples required to...
Zones of Protection
Protective zones are defined by closed dashed lines, containing one or more components. A key characteristic of these zones is the strategic placement of...
How Data are Classified: Numerical Data
Quantitative data may be either discrete or continuous. All quantitative data that take on only specific numerical...

