A patient-specific mass-spring model for biomechanical simulation of aortic root tissue during transcatheter aortic...

The success of transcatheter aortic valve implantation (TAVI) is highly dependent on the prediction of the interaction between the prosthesis and the aortic root anatomy. The simulation of the surgical procedure may be useful to guide artificial valve selection and delivery, nevertheless the introduction of simulation models into the clinical workflow is often hindered by model complexity and computational burden. To address this point, we introduced a patient-specific mass-spring model (MSM) with viscous damping, as a good trade-off between simulation accuracy and time-efficiency. The anatomical model consisted of a hexahedral mesh, segmented from pre-procedural patient-specific cardiac computer tomographic (CT) images of the aortic root, including valve leaflets and attached calcifications. Nodal forces were represented by linear-elastic springs acting on edges and angles. A fast integration approach based on the modulation of nodal masses was also tested. The model was validated on seven patients, comparing simulation results with post-procedural CT images with respect to calcification and aortic wall position. The validation showed that the MSM was able to predict calcification displacement with an average accuracy of 1.72 mm and 1.54 mm for the normal and fast integration approaches, respectively. Wall displacement root mean squared error after valve expansion was about 1 mm for both approaches, showing an improved matching with respect to the pre-procedural configuration. In terms of computational burden, the fast integration approach allowed a consistent reduction of the computational times, which decreased from 36 h to 21.8 min per 100 K hexahedra. Our findings suggest that the proposed linear-elastic MSM model may provide good accuracy and reduced computational times for TAVI simulations, fostering its inclusion in clinical routines.