Understanding and modelling the diffusion process of low molecular weight substances in polyethylene pipes

Peroxides are widely used as crosslinkers in polyethylene (PE) drinking water pipes. Cross-linked polyethylene (PEX) has better mechanical properties than PE, but peroxide decomposition by-products can migrate from PEX water pipes into the drinking water unless sufficient preventive actions are undertaken. This work systematically examines the migration of tert-Butyl methyl ether (MTBE), a dominating crosslinking by-product from PEX water pipes, into tap water by utilizing both experimental techniques and finite element (FEM) diffusion modeling. The effects of pipe geometry, tap water temperature (23-80 °C), boundary conditions (air or water interface) and degasing (at 180 °C) were considered. The MTBE diffusivity increased strongly with increasing temperature and it was concluded that a desired water quality can be achieved with proper degasing of the PEX pipes. As the FEM simulations were in excellent agreement with the experimental results, the model can accurately predict the MTBE concentration as a function of time, water temperature and PEX pipe geometry, and enable the pipe manufacturers to aid in ensuring desirable drinking water quality.