Related Experiment Video
Updated: Jan 26, 2026
Three-Dimensionally Printed Microfluidic Cross-flow System for Ultrafiltration/Nanofiltration Membrane Performance Testing
Published on: February 13, 2016
High-Performance TiO₂ Nanotubes/Poly(aryl ether sulfone) Hybrid Self-Cleaning Anti-Fouling Ultrafiltration Membranes
Zhi Geng1,2, Xinyu Wang3, Hongchuan Jiang4
1College of Environment, Research Centre for Municipal Wastewater Treatment and Water Quality Protection, Northeast Normal University, Changchun 130117, China. gengz100@nenu.edu.cn.
Abstract:
A series of novel self-cleaning hybrid photocatalytic ultrafiltration (UF) membranes were fabricated to separate polyacrylamide, which is widely used as a commercial flocculant. To maximize the self-cleaning and anti-fouling properties of hybrid membranes, high surface area TiO₂ nanotubes (TNTs) with excellent photocatalytic activity were homogeneously introduced into a poly(aryl ether sulfone) matrix by chemical bonds. The chemical structure, micromorphology, hydrophilicity, separation efficiency, fouling behavior, and self-cleaning property of the prepared hybrid membranes were well characterized and evaluated. For the optimal sample, the flux recovery ratio increased from ~40% to ~80% after simulated sunlight irradiation for 20 min, which was attributable to the homogeneous dispersion and efficient photocatalytic degradation ability of TNTs. Furthermore, the intelligent fabrication strategy enhanced the anti-aging ability of the hybrid membranes via the use of a fluorine-containing poly matrix. This work provided new insight into the fabrication of high-performance self-cleaning inorganic/organic hybrid membranes.
Related Concept Videos
02:29Ethers from Alcohols: Alcohol Dehydration and Williamson Ether Synthesis
Ethers can be prepared from organic compounds by various methods. Some of them are discussed below,
Preparation of Ethers by Alcohol Dehydration
In this method, in the presence of protic acids, alcohol dehydrates to produce alkenes and ethers under different conditions. For example, in the presence of sulphuric acid, dehydration of ethanol at 413 K yields ethoxyethane, whereas it yields ethene at 443 K.
02:28Structure and Nomenclature of Ethers
Ethers are organic compounds with an ether functional group which is characterized by an oxygen atom connected to two — identical or different — alkyl, aryl, or vinyl groups. The C–O–C linkage in dimethyl ether — the simplest ether — has an approximately tetrahedral bond angle of 110.3 degrees. The oxygen atom is sp3- hybridized, with the C–O distance being about 140 pm.
Classification of Ethers
Based on their attached substituent...
02:36Crown Ethers
01:10Nomenclature of Aryl and Heterocyclic Amines
01:30Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...
02:17Physical Properties of Ethers
An ether molecule has a net dipole moment due to the polarity of C–O bonds. Subsequently, boiling points of ethers are lower than those of alcohols of comparable molecular weight and slightly higher than those of hydrocarbons of comparable molecular weight (Table 1).
Ethers can act as hydrogen bond acceptors, making them more water-soluble than hydrocarbons, but since ethers cannot act as hydrogen bond donors, they are much less soluble in water than alcohols. Ethers are considered...