Related Experiment Video
Updated: Jan 25, 2026
Preparation and High-temperature Anti-adhesion Behavior of a Slippery Surface on Stainless Steel
Published on: March 29, 2018
Biomechanical compatibility of high strength nickel free stainless steel bone plate under lightweight design
Yibin Ren1, Haochuan Zhao2, Ke Yang3
1School of Material Science and Engineering, Shenyang Ligong University, Shenyang 110159, China.
Abstract:
High nitrogen nickel-free stainless steel (HNNFSS) has excellent mechanical properties, corrosion resistance and biocompatibility, but its strength advantage is not fully used even though with one time higher than that of the conventional 316 L stainless steel. In this work, the lightweight design of HNNFSS bone plate was studied using finite element analysis, and the effect of lightweight plate fixation on histological and biomechanical behavior of healing bone were also researched on fractured rabbit femur. The finite element analysis results showed that the lightweight plate within 18.2% thickness reduction had higher bending strength and more homogeneous stress distribution compared with 316 L stainless steel plate. There was no obvious difference in radiography, histology analysis of callus and expression pattern of insulin like growth factor-1(IGF-1) of callus between the lightweight HNNFSS plate group and 316 L stainless steel plate group in animal test, and the IGF-1 concentrations of callus and the biomechanical bending test results also showed no statistical significance (p > 0.05), even though the data of the lightweight HNNFSS plate group were relatively better than that of 316 L stainless steel plate group. Therefore, the high nitrogen nickel-free stainless steel has the lightweight potential to keep good fixing function and improve bone healing compared with 316 L stainless steel plate.
Related Concept Videos
01:17Steel Fastening Techniques
Rivets are cylindrical steel fasteners with a specially designed head. During application, rivets are heated until white-hot and then inserted through pre-drilled holes in the steel sections. A pneumatic hammer is used to shape the exposed end into a second head, securing the sections together.
Bolting is another...
01:26Steel Manufacturing
During this smelting process, limestone plays a crucial role by forming slag. Slag captures impurities within the molten iron, such...
03:05Acid Strength and Molecular Structure
In the absence of any leveling effect, the acid strength of binary compounds of hydrogen with nonmetals (A) increases as the H-A bond strength decreases down a group in the periodic table. For group 17, the order of increasing acidity is HF < HCl < HBr < HI. Likewise, for group 16, the order of increasing acid strength is H2O < H2S < H2Se < H2Te. Across a row in the periodic table, the acid strength of binary hydrogen compounds increases with increasing...
01:20Strength of Cement
For compressive strength tests, ASTM C 109-05 standards prescribe a cement-sand mix ratio of 1:2.75 and a water/cement ratio of 0.485 for making 2-inch cubes. These cubes are mixed, cast, and cured in saturated lime water at 23°C until testing. Flexural strength testing, outlined in...
01:30Relation Between Tensile Strength and Compressive Strength of Concrete
01:24Structural Steel Products
Once shaped, the steel's final form emerges as a continuous length, which is then segmented by a hot saw into manageable pieces. These segments...