Related Experiment Video
Updated: Jan 25, 2026

Pretreatment of Lignocellulosic Biomass with Low-cost Ionic Liquids
Published on: August 10, 2016
Development and economic analysis of bioethanol production facilities using lignocellulosic biomass
Kyeong Eop Kang1, Jun-Seong Jeong1, Yule Kim1
1Changhae Advanced Institute of Technology, Changhae Ethanol Co., Ltd., 15 Wonmansung-ro, Duckjin-gu, Jeonju 54854, Republic of Korea.
Abstract:
An integrated process for bioethanol production from Miscanthus sacchariflorus was used to construct a bench-scale plant constructed and an economic analysis was carried out to investigate the feasibility of its application to a commercial plant. The bench-scale plant was operated for 1 month and an economic analysis and sensitivity analysis was performed on the data acquired. In this study, 100,000 kL of bioethanol could be produced annually from 606,061 tons of M. sacchariflorus and the production cost was calculated to be US$1.76/L. However, the by-products of this process such as xylose molasses and lignin can be sold or used as a heat source, which can decrease the ethanol production costs. Therefore, the final ethanol production cost was calculated to be US$1.31/L, and is considerably influenced by the enzyme cost. The results and data obtained should contribute to the development of a commercial-scale lignocellulosic bioethanol plant.
Related Concept Videos
Sustainable Development
Scalar Product (Dot Product)
The scalar product of two vectors is obtained by multiplying...
Vector Product (Cross Product)
Consider the cross product of two vectors. Imagine rotating the first vector about...
Wood Products
Glue-laminated wood, often referred to as glulam, combines multiple smaller pieces of dimensional lumber using adhesives to form a single, larger piece. Cross-laminated timber consists...
Dot Product
In engineering, the dot product of any two vectors is the product of the magnitudes of the vectors and the cosine of the angle between them. It is denoted by a dot symbol between the two vectors.
Consider a vehicle pulling an object along the ground using a rope. If the rope makes an angle with the horizontal axis, the work done can be calculated using the dot product of the force applied and the object's displacement.
The dot...
Cross Product
The magnitude of the cross product is obtained by multiplying the magnitude of both the vectors and the sine of the angle between them. This means that a larger angle between the vectors will lead to a greater magnitude of the cross product.

