Related Experiment Video

Updated: Jan 25, 2026

Neonatal Subventricular Zone Electroporation
08:06

Neonatal Subventricular Zone Electroporation

Published on: February 11, 2013

13.3K

Pattern of road traffic crash hot zones versus probable hot zones in Tunisia: A geospatial analysis

Fedy Ouni1, Mounir Belloumi2

  • 1Faculty of Economic Sciences and Management, University of Sousse, Sahloul 4, BP 526 Sousse, Tunisia.

Accident; Analysis and Prevention
|May 4, 2019
PubMed

Keywords:
Hot zonesPrediction accuracy indexProbable hot zonesSpatial autocorrelation approachTraffic crashes

More Related Videos

A Novel Biaxial Testing Apparatus for the Determination of Forming Limit under Hot Stamping Conditions07:40

A Novel Biaxial Testing Apparatus for the Determination of Forming Limit under Hot Stamping Conditions

Published on: April 4, 2017

8.0K
Study of a Dot-patterning Process on Flexible Materials using Impact Print-Type Hot Embossing Technology06:57

Study of a Dot-patterning Process on Flexible Materials using Impact Print-Type Hot Embossing Technology

Published on: April 6, 2020

6.4K

Related Concept Videos

Hybrid Zones02:29

Hybrid Zones

Hybrid zones are narrow regions where two closely related species interact, mate, and produce hybrids. Relative to either parent species, hybrids may possess distinct phenotypic or genetic differences that impact their survival and reproductive success. The genetic variances introduced by hybridization influence species diversity and speciation processes within the hybrid zone.
21.8K
Zones of Protection01:16

Zones of Protection

In power systems, the entire setup is divided into protective zones to isolate faults and protect the rest of the network. These zones include generators, transformers, buses, transmission lines, distribution lines, and motors. Each zone can be visualized as a separate room in a house, with each room protected by its own circuit breaker.
Protective zones are defined by closed dashed lines, containing one or more components. A key characteristic of these zones is the strategic placement of...
785
Hot Weather Concreting01:20

Hot Weather Concreting

Concreting at elevated temperatures accelerates the hydration process, leading to quicker setting but potentially reducing the long-term strength of the concrete structure. Additionally, low air humidity fosters rapid moisture loss from the concrete, resulting in reduced workability, pronounced plastic shrinkage, and a higher likelihood of crazing.
Mitigating the heat increase in concrete can be economically achieved by shading aggregate stockpiles to prevent heating from solar radiation,...
313
Transition Zone01:28

Transition Zone

The transition zone in concrete is a critical area where aggregate meets cement paste, marked by a distinct porosity and weakness compared to the surrounding material. The adhesion around the aggregates is primarily due to Van Der Waals forces. The voids within this zone influence its robustness; initially, it is less durable than the surrounding bulk mortar due to larger voids. Initially, when concrete is compacted, a higher water-cement ratio near the aggregates leads to the formation of...
362
Masonry in Cold and Hot Weather Conditions01:21

Masonry in Cold and Hot Weather Conditions

In cold weather, masonry construction requires specific precautions to ensure mortar does not freeze before curing, as this can significantly weaken its strength and watertightness. Mortar temperature should be maintained between 60°F and 80°F to support proper hydration and curing. Below 40°F, mortar water must be heated, but should not exceed 120°F as high temperatures can reduce mortar's compressive and bond strength.
Other key practices include keeping masonry units...
340
Probability Laws01:49

Probability Laws

Overview
44.0K