Related Experiment Video
Updated: Jan 25, 2026

Analysis of Volatile and Oxidation Sensitive Compounds Using a Cold Inlet System and Electron Impact Mass Spectrometry
Published on: September 5, 2014
Impact Ionization Induced by Accelerated Photoelectrons for Wide-Range and Highly Sensitive Detection of Volatile
Yunsung Kang1, Soonjae Pyo1, Han-Il Jeong1
1School of Mechanical Engineering , Yonsei University , 50 Yonsei-ro, Seodaemun-gu , Seoul 03722 , Republic of Korea.
Abstract:
Ionization-based volatile organic compound (VOC) sensors that use photons or electrons operating at room temperature have attracted considerable attention as a promising alternative to conventional metal oxide-based sensors that require high temperature for sensing function. However, the photoionization sensors cannot ionize many gas species for their limited photon energy, and field emission-based ionization sensors that rely on the breakdown voltage of specific gas species in a pure state may not tell different concentration. This work demonstrates the detection of VOCs using impact ionization induced by accelerated photoelectrons. Although the photoelectrons emitted by relatively low photon energy typically have insufficient kinetic energy to cause impact ionization, in this approach, they are accelerated between microgap electrodes to enhance their kinetic energy such that the impact ionization of VOCs can be achieved. The demonstrated gas sensor sensitively detects toluene concentration in a wide range from 1000 ppm to 100 ppb with fast response and recovery time at room temperature. Additionally, diverse VOC species including benzene, p-xylene, and even acetylene with high ionization energy can be detected. The proposed method could be a viable solution for VOC sensors with low cost, scalable producibility, and high performance.
Related Concept Videos
Organic Compounds
Ionization Energy
Volatilization
Range
15.9; 16.1; 15.2; 14.8; 15.8; 15.9; 16.0; 15.5
Measurements of the amount of soda in a 16-ounce can vary since different subjects record these measurements or since the exact amount - 16 ounces of liquid, was not...
Temperature Dependence on Reaction Rate
Atoms, molecules, or ions must collide before they can react with each other. Atoms must be close together to form chemical bonds. This premise is the basis for a theory that explains many observations regarding chemical kinetics, including factors affecting reaction rates.
The collision theory is based on the postulates that (i) the reaction rate is proportional to the rate of reactant collisions, (ii) the reacting species collide in an orientation allowing contact between...
Accelerators
The effectiveness of calcium chloride can...

