Related Experiment Video
Updated: Jan 25, 2026

Author Spotlight: Fabrication of a Low-Cost, Fiber-Coupled, and Air-Spaced Fabry-Pérot Etalon
Published on: February 3, 2023
Demonstration of a Low-Cost and Portable Optical Cavity-Based Sensor through Refractive Index Measurements
Donggee Rho1, Caitlyn Breaux2, Seunghyun Kim3
1Electrical Engineering Department, Baylor University, One Bear Place #97356, Waco, TX 76798, USA. donggee_rho@baylor.edu.
Abstract:
An optical cavity-based sensor using a differential detection method has been proposed for point-of-care diagnostics. We developed a low-cost and portable optical cavity-based sensor system using a 3D printer and off-the-shelf optical components. In this paper, we demonstrate the sensing capability of the portable system through refractive index measurements. Fabricated optical cavity samples were tested using the portable system and compared to simulation results. A referencing technique and digital low pass filtering were applied to reduce the noise of the portable system. The measurement results match the simulation results well and show the improved linearity and sensitivity by employing the differential detection method. The limit of detection achieved was 1.73 × 10-5 Refractive Index Unit (RIU), which is comparable to other methods for refractive index sensing.
Related Concept Videos
Oral Cavity
Teeth: The teeth are the hardest structures in our bodies. Humans have two sets of teeth throughout their lifetime: deciduous (baby) teeth and permanent teeth. Each tooth consists of several parts: the crown (visible part), the root (embedded in the jaw), enamel (hard outer...
Nose and Nasal Cavity
Masonry Cavity Walls
Maintaining a clean cavity during construction...
Standing Waves in a Cavity
Influence of Earth's Curvature and Atmospheric Refraction on Leveling
Pressure Relationships in Thoracic Cavity
Breathing Mechanisms
Both intra-alveolar and intrapleural pressures rely on specific lung properties. The ability to breathe—allowing air to enter the lungs...

